Panasonic KX-NT265 Quick Reference Manual page 11

Wall Mounting
If you are using the Ethernet cable with boots, you can mount the unit
on a wall using the wall mounting plate (included) by following the
steps below.
All manuals and user guides at all-guides.com
To AC Outlet
Ethernet cable (Straight CAT 5 or higher cable) [not included]
To a Switching Hub (LAN)
1
Install 2 screws spaced 83 mm or 100
mm apart, to the wall.
2
Insert the upper and lower tabs
of the wall mounting plate (included)
into the designated openings in the
base unit, then slide it in the direction
of the arrow until it clicks.
3
Mount the base unit securely on the wall.
83 mm
100 mm
Screw
— 11 —