Mec TriTask-300 Series Operating Instructions

OPERATING INSTRUCTIONS
3-Step Lead Acid Battery Charger
12V / 15A
24V / 11A
Dear Customer!
Thank you very much for your trust in us and our product.
Please read these operating instructions carefully before start of operation.
MEC-Energietechnik GmbH

1. Safety Rules and General Warnings


ATTENTION: 100-240 Volts AC voltage, device is not suitable for children – danger of life!!

ATTENTION: The charger is exclusively designed for 12V/24V/36V rechargeable lead /acid batteries and
must not be used for other purposes.

ATTENTION: Please consider the charging instructions from the battery manufacturer before charging!

Never place the device on top of the battery while charging!

EXPLOSION RISK! Avoid sparks or open flames while charging!

Use the device only in dry rooms and protect against dust, heat (>40°C) and humidity (>80% rel.)

Protect against direct solar radiation.

No fluids of any kind must get into the device.

In case of obvious damage or malfunction immediately disconnect the device from mains supply and protect
against unintended reconnection

Clean with a dry cloth only.

DO NOT OPEN! Repair work must only be accomplished by authorized companies or specialized technical
staff.

Disconnect from mains before connecting or disconnecting the battery.

Do not recharge non-rechargeable batteries.
phone: +43 (0) 4242 / 55 100 | fax: - 11 | e-mail: office@MEC-Energietechnik.at | web: www.mec-energietechnik.at
TriTask-300 series
Version / MEC Art-Nr.:
121-06153-170
121-12113-170
12V / 20A 121-06203-170
36V / 7A 121-18702-170