Mec NOVA-150F Series Instruction Manual

Mec NOVA-150F Series Instruction Manual

Advertisement

Quick Links

Instruction Manual
Battery Chargers
NOVA-150F Series:

Safety Rules and General Warnings

Persons, who are not able to use the charger in a safe way, because of their physical, sensory or mental incompetence, or because of their
lack of experience, should not use without the control or instruction from a skilled or qualified person.
The charger runs with 100-240 Volts alternating current, which is not suitable for children – Danger of Life. And beware of risk of electric shock
at all times.
Ensure sufficient air ventilation; do not cover the vent outlet while charging in progress.
Avoid flammable gases, solvents or vapours all the time. Prevent open flame or sparks while charging in progress. Explosion RISK!
The charger is exclusively designed for charging rechargeable batteries and must not be used for other purposes. Corresponding model should
be selected for particular lithium-based or lead-based batteries.
You should take into consideration of the charging instructions issued by the battery manufacturer before charging. Check also if the charge
profile fits your battery and application.
DO NOT OPEN or DISMANTLE the charger. Repair work must only be processed by authorized technical staff.
If the mains connection of the charger is damaged, it must be replaced with an original wire which is available at MEC or authorized dealers.
NEVER place the charger on top of the battery while charging in progress.
The charger should be protected against direct solar radiation or temperatures over 40°C.
In case of obvious damage or malfunctioning, disconnect the charger from the mains supply and protect against unintended reconnection.
The DC cable must not be cut, shortened or extended under any circumstances.
Keep the charger in dry room (rel. humidity <80%). Clean with dry cloth only. Avoid fluid of any kind to get into the charger.

Special Features

IP20 Load-dependent fan cooling; spray-painted metal housing
Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle
Battery "wake-up" function by sending out programmed "wake-up" pulses
Optimal and gentle charging for the greatest possiblity of charge cycles guaranteed with high frequent combinatorial circuit technology
5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based
batteries
LED indicators showing corresponding charge status and errors
Protection against short circuit, reverse polarity, over temperature or overload
Product Configuration
Models Targeting Lithium-based Batteries
1.
Mains Socket
4.
Green Full LED
7.
Wake-up Button
IP20 Load-dependent fan-cooled. With one (1) or multiple,
selectable charge profiles, customized parameters.
Ignition-Lock (optional).
2.
Cooling Fan
5.
Yellow Charge LED
8.
DC Cable
3.
Red Mains LED
6.
Red Error LED
MEC-Energijski sistemi,d.o.o.
Cesta na Okroglo 5, 4204 Naklo, Slovenia/Europe
Tel: +386 (0) 59 028 800
Email: office@mec-europe.com
www.mec-europe.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NOVA-150F Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mec NOVA-150F Series

  • Page 1 DO NOT OPEN or DISMANTLE the charger. Repair work must only be processed by authorized technical staff. • If the mains connection of the charger is damaged, it must be replaced with an original wire which is available at MEC or authorized dealers. •...
  • Page 2 Instruction Manual NOVA-150F Series Models Targeting Lead-based Batteries Mains Socket Cooling Fan Red Mains LED Green Full LED Yellow Charge LED Red Error LED Slide Switch with Program LEDs Preparation – Before Charging General Checking • Check thoroughly the charger itself including all the cables show no damages •...
  • Page 3 Instruction Manual NOVA-150F Series Disconnect the Charger from the Battery: First, disconnect the charger from the mains supply Then, disconnect the charger from the battery (release the Black (-) terminal then the Red (+)) After disconnecting the charger from the mains, please wait at least 5 seconds to reactivate the charger if in need – otherwise damages may be resulted.
  • Page 4 Instruction Manual NOVA-150F Series Technical Specifications DC Ausgang | DC Output LiFePO4 Batteries Li-ion Batteries Lead-based Batteries 3.2V/cell (nom.) 3.6V/cell (nom.) Ladespannung max. Charge Voltage max. 12.8V 25.6V 14.4V 25.2V (+/-1%) Ladestrom max. Charge Current max. (+/-1%) Wirkungsgrad max. | Efficiency max.

Table of Contents