Mec TriTask-40 Series Instruction Manual

3-Step Lead/Acid Plug-Top Battery Charger
Version
MEC Art.-Nr.
6V - 2.7A 111-03272-130
6V/12V - 2.7A 111-06272-131
Dear Customer!
Thank you very much for your trust in us and our product.
Please read these operating instructions carefully before start of operation.
MEC-Energietechnik GmbH

1. Safety Rules and General Warnings


ATTENTION: 100-240 Volts AC voltage, device is not suitable for children – danger of life!!

ATTENTION: The charger is exclusively designed for 6V/12V/24V rechargeable lead /acid batteries and must
not be used for other purposes.

ATTENTION: Please consider the charging instructions from the battery manufacturer before charging!

Never place the device on top of the battery while charging!

EXPLOSION RISK! Avoid sparks or open flames while charging!

Use the device only in dry rooms and protect against dust, heat (>40°C) and humidity (>80% rel.)

Protect against direct solar radiation.

No fluids of any kind must get into the device.

In case of obvious damage or malfunction immediately disconnect the device from mains supply and protect
against unintended reconnection

Clean with a dry cloth only.

DO NOT OPEN! Repair work must only be accomplished by authorized companies or specialized technical
staff.

Disconnect from mains before connecting or disconnecting the battery.

Do not recharge non-rechargeable batteries.
Phone: +43 (0) 4242 / 55 100 | fax: - 11 | e-mail: office@MEC-Energietechnik.at | Web: www.mec-energietechnik.at

INSTRUCTION MANUAL

TriTask-40 Series
Version
12V – 1.5A
12V – 2.7A
MEC-Energietechnik GmbH | Energiestrasse 3 | 9500 Villach |Austria
MEC Art.-Nr.
111-06152-130
111-06272-130
Version MEC Art.-Nr.
24V - 1.5A 111-12152-130