Mec TriTask-150s Operating Instructions

Mec TriTask-150s Operating Instructions

3-step charger with selectable charge voltage for lead-acid batteries

Advertisement

Quick Links

OPERATING INSTRUCTIONS

3-Step Charger with selectable charge voltage
12V / 6A 161-06602-100
12V / 8A 161-06802-100
Dear Customer!
Thank you very much for your trust in us and our product.
Please read these operating instructions carefully before start of operation.
MEC-Energietechnik GmbH

1. Safety Rules and General Warnings

ATTENTION: 230 Volts AC voltage, device is not suitable for children – danger of life!!
ATTENTION: The charger is exclusively designed for 12V/24V rechargeable lead /acid batteries and must
not be used for other purposes.
ATTENTION: Please consider the charging instructions from the battery manufacturer before charging!
Never place the device on top of the battery while charging!
EXPLOSION RISK! Avoid sparks or open flames while charging!
Use the device only in dry rooms and protect against dust, heat (>40°C) and humidity (>80% rel.)
Protect against direct solar radiation.
No fluids of any kind must get into the device.
In case of obvious damage or malfunction immediately disconnect the device from mains supply and protect
against unintended reconnection
Clean with a dry cloth only.
DO NOT OPEN! Repair work must only be accomplished by authorized companies or specialized technical
staff.
Disconnect from mains before connecting or disconnecting the battery.
Do not recharge non-rechargeable batteries.
-- TriTask-150s --
for lead-acid Batteries
Art.-No.:
Art.-No.:
12V / 10A
161-06103-100
24V / 5A
161-12502-100

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TriTask-150s and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mec TriTask-150s

  • Page 1: Operating Instructions

    OPERATING INSTRUCTIONS -- TriTask-150s -- 3-Step Charger with selectable charge voltage for lead-acid Batteries Art.-No.: Art.-No.: 12V / 6A 161-06602-100 12V / 10A 161-06103-100 12V / 8A 161-06802-100 24V / 5A 161-12502-100 Dear Customer! Thank you very much for your trust in us and our product.
  • Page 2 MEC-Energietechnik GmbH OPERATING INSTRUCTIONS TriTask-150s 2. General Information This charger with its compact metal enclosure is ideal for maintaining your Ca- , Wet-, Gel- and AGM-batteries in top condition. The specific charge voltage for these battery types can be set via a selector switch. The charger is designed for the charging of lead/acid-batteries of cars, motor cycles and old timers.
  • Page 3 - A defective or deep-discharged battery is connected  Battery must be disposed; Red Power-LED does not light: - Check if the mains-plug is connected properly; - Check if mains cable is defective; 7. Technical Data TriTask-150s Series Version 12V / 6A 12V / 8A 12V / 10A...
  • Page 4 9. Disclaimer of Warranty  The warranty period (see our GTC) starts with device being dispatched by the manufacturer. The MEC- Energietechnik GmbH is accepting liability by guaranteeing to working hours and spare parts only.

Table of Contents