Help and support Turn ON and OFF Important Safety instructions Select Modes Care for your product Select Equalizer (EQ) Effect Care of the environment Adjust the Volume Compliance Bluetooth Operation What’s in the Box USB Operation Main unit Wireless subwoofer Connectors Remote control Prepare the remote control...
This product complies with the radio interference requirements of the European Community. Hereby,TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.You can find the Declaration of Conformity on www.p4c.philips.com...
Wireless subwoofer This section includes an overview of the wireless subwoofer. AC~Socket Connect to the power supply. Pair Button Press to enter the pairing mode for the subwoofer. Subwoofer Indicator When the power is turned on,the POWER indicator lights up. Switch the Soundbar on or off.
Pair HDMI HDMI OUT OPTICAL IN AUX IN AC IN (ARC) OPTICAL Audio input from a USB storage device . HDMI OUT (ARC) Connect to the HDMI input on the TV . OPTICAL Connect to an optical audio output on the TV or a digital device .
(POWER) Prepare the Remote control Switch the Soundbar on or off. • The provided Remote Control allows the (MUTE) unit to be operated from a distance. Mute or restore volume. • Even if the Remote Control is operated HDMI ARC within the effective range 19.7 feet (6m), Switch your source to HDMI ARC remote control operation maybe...
Precautions Concerning Battery • When the Remote Control is not to be used for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking. • If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with new ones.
Connect to Optical Socket Connect to HDMI (ARC) Socket HDMI OUT OPTICAL IN AUX IN AC IN (ARC) Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For further setup details on HDR display, please refer to the instruction manual of your TV.
Pair up with the subwoofer HDMI OUT OPTICAL IN AUX IN AC IN (ARC) Automatic Pairing Plug the Soundbar and the subwoofer into the mains sockets and then press on the unit or remote control to switch the unit to On mode. The subwoofer and Soundbar will automatically pair.
4 Use your Soundbar • Please turn the unit off completely to save energy when not in use. Select Modes This section helps you use the Soundbar to 1. Press the (Source) button repeatedly on the play audio from connected devices. unit or press corresponding button on the Before you start remote control to select the AUX, OPTICAL,...
Android phone, or Bluetooth, search for and select laptop), and then you can listen to the audio files Philips TAB7305 to start connection (see stored on the device through your Soundbar the user manual of the Bluetooth device on speakers.
4.Wait until the Soundbar‘s indicator becomes solid white. 5.To exit Bluetooth, switch the unit to another source. When your switch back to Bluetooth mode, Bluetooth connection remains active. 6.If you want to connect to another device, press and hold the button on the soundbar or the Pair/BT button on the remote control to disconnect the current connected Bluetooth...
Page 16
Power Consumption • Power Consumption for Soundbar:84W • Power Consumption for Subwoofer:117W • Standby Power Consumption:<2W Remote control • Distance/Angle:6m/30° • Battery Type:CR2025 Amplifier Supported Audio Format • Total output power: HDMI ARC 300W, <10%THD • Dolby Digital,Dolby Digital Plus,LPCM •...
Page 18
Specifications are subject to change without notice. Please visit http://www.philips.com/support for the latest updates and documents. Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited. or one of its affiliates, and MMD Hong Kong...
Need help?
Do you have a question about the 7000 Series and is the answer not in the manual?
Questions and answers