Remote Control; Prepare The Remote Control - Philips 7000 Series User Manual

1
(POWER)
Switch the Soundbar on or off.
2
(MUTE)
Mute or restore volume.
3
HDMI ARC
Switch your source to HDMI ARC
connection.
4
AUX
Switch your audio source to the AUX
connection (3.5mm jack).
5
Pair/BT
Switch to Bluetooth mode. Press and
hold to activate the pairing function in
Bluetooth mode or disconnect the
existing paired Bluetooth device.
6
OPTICAL
Switch your audio source to the optical
connection.
7
USB
Switch to USB mode.
8
EQ
Select Equalizer (EQ) effect.
9
(PLAY/PAUSE)
Start, pause or resume play in BT/USB
mode.
10
(PREVIOUS/NEXT)
Skip to the previous or next track in
BT/USB mode.
11
VOL +/- (Soundbar's Volume)
Increase or decrease volume.
12
+/- (Subwoofer's Volume)
Increase or decrease the subwoofer's
volume.

Prepare the Remote control

• The provided Remote Control allows the
unit to be operated from a distance.
• Even if the Remote Control is operated
within the effective range 19.7 feet (6m),
remote control operation maybe
impossible if there are any obstacles
between the unit and the remote control.
• If the Remote Control is operated near
other products which generate infra-red
rays, or if other remote control devices
using infra-red rays are used near the unit,
it may operate incorrectly. Conversely, the
other products may operate incorrectly.
First-time use :
The unit has a pre-installed lithium battery.
Remove the protective tab to activate the
remote control battery.
Replace the Remote Control Battery
The remote control requires a 3V CR2025
Lithium battery.
1 Use tools (such as coin batteries/coins)
to catch the groove of the battery box
cover and turn counter-clockwise to
(unlock).
2 Remove the old battery, which is located
in the lid, place the new Cr2025 battery
and pay attention to the correct polarity
(+/-).
3 Use the tools to catch the groove of the
battery compartment cover and turn
clockwise to (lock), secure it into the

remote control.