Contents 1 Important safety instructions Safety Care for your product Care of the environment Declaration of conformity Help and support FCC information 2 Your Soundbar What’s in the box Soundbar Connectors Wireless subwoofer Remote control Prepare the Remote Control Placement Wall mount 3 Connect Connect to HDMI socket...
1 Important or into the product, disconnect it from the power outlet immediately. Contact safety Consumer Care to have the product checked before use. instructions • Never place the product and heat sources, including direct sunlight. Read and understand all instructions •...
• Never place the product or any Note objects on power cords or on other electrical equipment. • The rating label is pasted on the bottom or back of the equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its Care for your product temperature matches room...
Declaration of conformity Help and support This product complies with the radio For extensive online support, visit interference requirements of the www.philips.com/support to: European community. • download the user manual and the Hereby, MMD Hong Kong Holding quick start guide Limited declares that the product •...
et votre corps. Cet transmetteur ne FCC information liaison avec toute autre antenne ou transmetteur. NOTE: This equipment has been tested • and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits limites de la classe B de la FCC.
2 Your Soundbar Soundbar This section includes an overview of the Congratulations on your purchase, and welcome to Philips! To fully soundbar. www.philips.com/support. What’s in the box Check and identify the items in the package: • Soundbar • Remote control 1 Source •...
Connectors Wireless subwoofer This section includes an overview of the This section includes an overview of the connectors available on your soundbar. wireless subwoofer. 1 AC~ socket Connect to the power supply. 2 Pair button Only for manual operation in case auto pair is failed.
Remote control This section includes an overview of the remote control. (Standby-On) Switch the Soundbar on or to standby. (Mute) Mute or restore volume. (Previous/Next) Skip to the previous or next track in USB/BT mode. (Play/Pause) Start, pause or resume play in USB/ BT mode.
Placement Replace the Remote Control Battery • The remote control requires a Place the subwoofer at least 1 meter (3 CR2025, 3V Lithium battery. feet) away from your soundbar, and 10 Push the tab on the side of the centimeters away from the wall. battery tray towards the tray.
Wall mount Drill 2 parallel holes (diameter 3-8mm each according to wall type) Note on the wall. The distance between the holes should be 751mm / 29.5”. • Improper wall mounting may result in accident, » Secure the dowels and screws in injury or damage.
3 Connect Note • Your TV must support the HDMI-CEC and ARC This section helps you connect your function. HDMI-CEC and ARC must be set to On. • The setting method of HDMI-CEC and ARC may soundbar to a TV and other devices, and then set it up.
a. Use 3.5mm-RCA audio cable Pair up with the subwoofer • Use a RCA to 3.5mm audio cable to connect the TV’s audio output sockets to the AUX socket Tips on the soundbar. • The subwoofer should be within 6 m of the soundbar in an open area.
4 Use your Press and hold the Pair button on the rear of the subwoofer for 3 seconds. soundbar » The indicator on the subwoofer will rapidly blink. Then press on the soundbar This section helps you use the soundbar or remote control to switch the to play audio from connected devices.
State Source Select Equalizer (EQ) • Solid AUX/USB • Blink • Solid BT Connected • Fast blink BT pairing • Slow blink BT disconnected your video or music. Optical • Solid Optical Press the EQ button on the remote HDMI (ARC) • Solid HDMI ARC control to select your desired preset »...
Bluetooth, search for and select The music streaming may be interrupted by obstacles between the device and soundbar, Philips TAB7007 to start connection such as wall, metallic casing that covers the (see the user manual of the Bluetooth device, or other devices nearby that operate in device on how to enable Bluetooth).
Operate your audio device directly Button Action for playback features. Start, pause or resume play Press the +/- (Volume) buttons to Skip to the previous track adjust the volume to your desired Skip to the next track level. Note Note •...
Page 18
5 Product Subwoofer speci�cations Power supply 100-240V~ 50/60 Hz Power consumption 25 W Note Standby consumption < 0.5 W • Frequency response 40Hz - 150 Hz change without notice. Impedance 4 Ω Dimensions 170 x 344 x 309 Bluetooth / Wireless (W x H x D) Weight 4.9 kg...
When using either of the digital input, request service. If you still have a problem, if there is no audio: get support at www.philips.com/support. - Try setting the TV output to PCM or - Connect directly to your Blu-ray/ Main unit other sources.
• The soundbar is already connected Trademarks: with another Bluetooth device. Disconnect the connected device, and then try again. Quality of audio play from a connected Bluetooth device is poor. The Adopted Trademarks HDMI, HDMI • The Bluetooth reception is poor. Move HDMI trade dress and the HDMI Logos are the device closer to the soundbar, or trademarks or registered trademarks of...
Page 21
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited Kong Holding Limited is the warrantor in relation to this product.
Need help?
Do you have a question about the 7000 Series and is the answer not in the manual?
Questions and answers