hepco & becker Minirack 6602533 01 01 Manual

Kawasaki z 900 rs/cafe 2018-

Advertisement

Minirack
KAWASAKI Z 900 RS/cafe
ab Baujahr 2018 / from date of manufacture 2018
Artikel Nr.: / Item-no.:
2533
660
01 01
INHALT

CONTENTS

1x
700009031
Minirack Alupalette
1x
700009946
Rohradapter links
1x
700009947
Rohradapter rechts
1x
700009929
Halteadapter oben hinten
2x
700009932
Reflektorenhalter
1x
700009949
Schraubensatz
2x
Zylinderschraube ISK M8x20
2x
Zylinderschraube ISK M8x35
2x
Linsenschraube M6x20
4x
Senkkopfschrauben M6x16
8x
U- Scheibe ø6,4
2x
U- Scheibe ø8,4
6x
Selbstsichernde Mutter M6
1x
Logo Hepco & Becker ø30mm
4x
Verschlußstopfen Ø8 mm
BENÖTIGTE WERKZEUGE

TOOLS REQUIRED

Set
WICHTIG
IMPORTANT
Die Voraussetzung für die Montage ist natürlich eine gewisse technische Erfahrung. Wenn Sie sich nicht sicher sind,
wie man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen. Ziehen sie alle zugänglichen
Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann auf das entsprechende
Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt spannungsfrei angebaut ist. Anzugsmomente
beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
Of course, the assembly requires a certain technical experience. If you are not sure how to execute a determined action,
you should ask your local distributor to do it. First, tighten all screws only loosely. After mounting all parts, the screws
should be tightened to the torque specified. This guarantees, that the product is mounted without tension. Observe
the tightening torques of the manufacturer! Control all screw connections after the assembling for tightness!
Schwarz/black
Verlängerung/extension
1x
700009031 Alu palette
1x
700009946 Tube adapter left
1x
700009947 Tube adapter right
1x
700009929 Rear adapter top
2x
700009932 Holder for reflector
1x
700009949 Screw kit
2x
allen screw M8x20
2x
allen screw M8x35
2x
filister head screws M6x20
4x
countersunk screws M6x16
8x
washer ø6,4
2x
washer ø8,4
6x
self lock nut M6
1x
emblem Hepco & Becker ø30mm
4x
plastic plugs Ø8 mm
Kombinierbar mit C-Bow Halter 6302533 00 01
Combinable with C-Bow holder 6302533 00 01
Ratsche/Ratchet
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Minirack 6602533 01 01 and is the answer not in the manual?

Questions and answers

Summary of Contents for hepco & becker Minirack 6602533 01 01

  • Page 1 Minirack KAWASAKI Z 900 RS/cafe ab Baujahr 2018 / from date of manufacture 2018 Artikel Nr.: / Item-no.: 2533 01 01 Schwarz/black INHALT CONTENTS 700009031 Minirack Alupalette 700009031 Alu palette 700009946 Rohradapter links 700009946 Tube adapter left 700009947 Rohradapter rechts 700009947 Tube adapter right 700009929 Halteadapter oben hinten...
  • Page 2 Minirack KAWASAKI Z 900 RS/cafe ab Baujahr 2018 / from date of manufacture 2018 Artikel Nr.: / Item-no.: 2533 01 01 Schwarz/black VORBEREITUNG PREPARING Die Sitzbank demontieren und die Blinkerkabel trennen. Die Verkleidungsteile entfernen - hierzu zuerst die beiden Kreuzschlitzschrauben unter dem Heck entfernen.
  • Page 3 Minirack KAWASAKI Z 900 RS/cafe ab Baujahr 2018 / from date of manufacture 2018 Artikel Nr.: / Item-no.: 2533 01 01 Schwarz/black MONTAGEANLEITUNG MOUNTING INSTRUCTIONS Montage der neuen Reflektorenhalter rechts/links: Die Reflektoren vom demontierten Originalhalter entfernen und an den mitgelieferten Reflektorenhalter verschrauben (mit Originalmutter).
  • Page 4 Minirack KAWASAKI Z 900 RS/cafe ab Baujahr 2018 / from date of manufacture 2018 Artikel Nr.: / Item-no.: 2533 01 01 Schwarz/black MONTAGEANLEITUNG MOUNTING INSTRUCTIONS Montage der Alupalette: Auf den zuvor montierten Rohradaptern mit den Senkkopfschrauben M6x16. Von unten mit den selbstsichernden Muttern M6 sowie U-Scheiben Ø6,4 verschrauben.

Table of Contents