Table of Contents
Advertisement
1.1
Overview
Welcome to use this self-made 4*100W audio amplifier board which is a perfect class-D
architecture integrated with Tripath's high performance TC2000 and TP2050 chips
supporting dual channel audio amplification. Powered by any DC voltage from 10V to 30V,
this high efficiency amplifier board is capable of outputting up to 100W per channel. It can
be used to drive 4Ω or 8Ω passive speakers. With high efficiency, it especially is available
for the outdoor venues where power supply is always in consideration.
TC2000 is a dual channel audio controller produced by Tripath using its patent Digital
Power Processing technology (DPP
TP2050, it can achieve class-T audio power amplification, as well as lower THD+N and
higher S/N ratio .
For 100W power output, this amplifier board integrates one TC2000 chips and two TP2050
chips so that it supports dual-channel audio amplification of up to 100W each. Resistance
and capacity components of high quality are used to gain the perfect timber, finally realize
high S/N ratio, low THD+N, wide frequency response range etc.
FIGURE 1-1 OVERVIEW
Note: All the diagrams in this manual are for reference only.
1.2 Accessories
We don't provide audio accessories together with this product. Please go to
www.sure-electronics.com
© 2004-2012 Sure Electronics Inc
4 X 100WATT CLASS D AUDIO
AMPLIFIER BOARD - T-AMP
Chapter 1. Overview
TM
to choose what you need.
USER'S GUIDE
). Combined with switching power output stages
.
AA-AB33182_Ver1.0_Page 1
Advertisement
Table of Contents
