Garmin G5 User Manual page 62

Installation Manual
6) Engage the autopilot in TRK/PIT mode and command a nose up, right bank.
a) Press the AP button on the GMC 30X.
b) Press the HDG button on the GMC 30X.
c) Push the knob on the G5 to access the menu.
d) Select Track from the menu on the G5.
e) Push and hold the knob on the G5 to center the HDG bug.
f) Rotate the knob on the G5 clockwise to command a right turn.
g) Rotate the wheel on the GMC 30X up to command a pitch upwards.
7) Verify the stick properly moves toward the tail and toward the right wing
smoothly with no control system binding.
8) Engage the autopilot in TRK/PIT mode and command a nose up, left bank.
a) Press the AP button on the GMC 30X.
b) Press the HDG button on the GMC 30X.
c) Push the knob on the G5 to access the menu.
d) Select Track from the menu on the G5.
e) Push and hold the knob on the G5 to center the HDG bug.
f) Rotate the knob on the G5 counterclockwise to command a left turn.
g) Rotate the wheel on the GMC 30X up to command a pitch upwards.
9) Verify the stick properly moves toward the tail and toward the left wing
smoothly with no control system binding.
10) If the stick position does not move in the correct direction, correct the roll
and pitch servo directions documented in the Servo Wiring Checkout.
11) Engage the autopilot and verify it can be overpowered in both the pitch
and roll axis. If the autopilot cannot be overpowered, use the Autopilot
Roll Servo and Autopilot Pitch Servo configuration pages to reduce the
Maximum Torque setting for the associated servo.
12) Engage the autopilot and verify that it properly disconnects with a short
press and release of the CWS/DISCONNECT button.
50
Garmin G5 User's Manual 190-02072-00 Rev. B