Garmin G5 User Manual page 38

Installation Manual
Cut out panel
to inside line
IMPORTANT!
Ensure the Page Scaling setting
is set to NONE when printing
this page. Verify dimensions
of printed template are
accurate before cutting panel.
For mounting holes, drill out with
#25 drill bit and use Garmin
mounting ring P/N 115-02251-03.
For panel cutout, drill out with a
3.125" diameter bimetal hole saw.
The outline in this drawing is identical
to the outline of the actual bezel.
Figure 1-13 G5 Panel Cutout Drawing (Template)
26
Garmin G5 User's Manual 190-02072-00 Rev. B