Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Figure 45: Cisco ASR 1006 Router DC Power Supply (ASR1006-PWR-DC) Terminal Block Ground Lugs
1
Negative lug and wire with sleeving wrapped around the wire and end of lug
2
Positive lug and wire with sleeving wrapped around the wire and end of lug
The following figure shows the terminal block ground lugs for the ASR1013/06-PWR-DC power supply of the Cisco
ASR 1006 Router.
Figure 46: Cisco ASR 1006 Router DC Power Supply (ASR1013/06-PWR-DC) Ground Lug Installation
Replacing the DC Power Supply in Cisco ASR 1006 Router
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
3
Protective sleeving area
4
Ground stud and cable
69