Cisco ASR 1000 Series Replacing page 120

Repacking the Router
6. Wrap two packaging straps tightly around the top and bottom of the package to hold the outside carton
and the bottom pallet.
DETAILED STEPS
Step 1 Place the bottom packing material section inside the bottom of the shipping container.
Step 2
Use at least two people to place the Cisco ASR 1000 Series Router inside the container. Be sure that the chassis is
positioned correctly before you lower it inside the container.
Step 3
Place the top packing material over the top of the Cisco ASR 1000 Series Router.
Step 4 Place both accessory boxes inside the cutouts in the top section of the packing material.
Step 5
Fold the outside carton down over the top of the accessory boxes and seal with packing tape.
Step 6 Wrap two packaging straps tightly around the top and bottom of the package to hold the outside carton and the bottom
pallet.
Caution Do not use tape to hold the outside carton to the bottom pallet. Packaging straps must be used.
What to do next
This completes the procedure for repacking the shipping container.
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
120
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers