H4 (Test & Copy Mode); L4 (Test & Copy Mode) - VIPowER SmartDup VP-8220 Installation Manual

Vipower, inc. vp-8220 smartdup installation manual
Table of Contents

Advertisement

H4(Test & Copy Mode) DIP SW 1 4 at ON position, 2 3 at OFF position
L4(Test & Copy Mode) DIP SW 1 at ON position, 2 3 4 at OFF position-----
I
f you adjust DIP SW to L4, all operation steps same as H4, the Recording
Speed will drop to 4x only.
Please make sure CD-R or CD-RW media is blank.
4-1.Turn Rock Switch to position (CD Duplicator). LED will show version
number.
4-2. Than LED display showing: from 00,11, 22, 33, ......88, 99
4-3. Duplicator will chk itself & get ready.
4-4. SmartDup ready, please insert your CD title into your CD-ROM Drive &
Blank CD-R or CD-RW Media in CD-RW Writer.
4-5. LED Display showing final counts down, than LED showing H4 or L4.
4-6. LED Display showing CD-R or CD-RW Media maximum writing speed.
4-7. LED Display showing CD-R or CD-RW Media minimum writing time remaining.
4-8. After Test success, Buzzer Beep & LED showing 00. Than re-start Copy.
4-8-1. If fail, LED will show: Er & eject CD-R Media also.
4-9. LED Display showing CD-R or CD-RW Media maximum writing speed.
4-10. LED Display showing CD-R or CD-RW Media minimum writing time
remaining.
4-11. After Copy success, Buzzer will Beep & eject CD-R media. LED showing 00
.
4-11-1. If fail, LED will showing: Er & eject CD-R Media, Buzzer will Beep also
.
SmartDup VP-8220 Operation Manu
Power-On:
display firmware version number. (Buzzer 0.5s X1)
ex:
Self-Test:
Only one segment is running and display "rd" (ready)
Count Down:
After drives & discs ready in current mode, wait for
5 seconds. (Buzzer 0.2s X1)
ex:
CD-R Maximum Writing Speed:
or
or
Remain minutes:
During Test or Copy mode. Flash every second
ex:
or
or
OK:
After Self-Test or Test or Erase or Copy. (Buzzer 1sX2)
FAIL:
After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3)
CD-R Maximum Writing Speed:
or
or
Remain minutes:
During Test or Copy mode. Flash every second
ex:
or
or
OK:
After Self-Test or Test or Erase or Copy. (Buzzer 1sX2)
FAIL:
After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3)
-----
or
5

Advertisement

Table of Contents
loading

Table of Contents