New Firm Ware Download How to Up Grade CD ROM Firm Ware ViPowER Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ViPowER Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
1. One to one Stand-Alone IDE CD Duplicator. 2. Auto duplication & Easy operation without any push bottom. 3. Fastest CD Duplicator up to 24x speed (ViPowER is the only factory that manufactures it today!) 4. Auto Detects CD-R or CD-RW media's acceptable maximum writing speed and minimum writing time.
Self-Test: 1-4. Please insert your new Firm-Ware CD title into your CD-ROM Drives, operation step as below: 1-4-1. Please down load new Firm-Ware from www.vipower.com.tw or www.vipower.com to HDD. 1 4 2. Switch your power switch to (PC interface) 1-4-3. Please check Optional Step (page 10) 1-4-4.
2-8-1. If fail, LED will showing: Er & eject CD-R Media, Buzzer will Beep also. FAIL: After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3) SmartDup VP-8220 Operation Manu display firmware version number. (Buzzer 0.5s X1) Only one segment is running and display "rd" (ready) After drives &...
After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3) display firmware version number. (Buzzer 0.5s X1) Only one segment is running and display "rd" (ready) After drives & discs ready in current mode, wait for 5 seconds. (Buzzer 0.2s X1) SmartDup VP-8220 Operation Manu...
4-11-1. If fail, LED will showing: Er & eject CD-R Media, Buzzer will Beep also FAIL: After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3) SmartDup VP-8220 Operation Manu display firmware version number. (Buzzer 0.5s X1) Only one segment is running and display "rd" (ready) After drives &...
(Buzzer 0.5s X1) Only one segment is running and display "rd" (ready) After drives & discs ready in current mode, wait for 5 seconds. (Buzzer 0.2s X1) During Test or Copy mode. Flash every second -------------- SmartDup VP-8220 Operation Manu...
6-8-1. If fail, LED will show: Er & eject CD-R Media also. FAIL: After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3) SmartDup VP-8220 Operation Manu display firmware version number. (Buzzer 0.5s X1) Only one segment is running and display "rd" (ready) After drives &...
After drives & discs ready in current mode, wait for 5 seconds. (Buzzer 0.2s X1) After drives & discs ready in current mode, wait for 5 seconds. (Buzzer 0.2s X1) During Test or Copy mode. Flash every second ------------------ SmartDup VP-8220 Operation Manu...
SmartDup VP-8220 Optional interface: VP-9006 : PCMCIA to IDE cable with 36 pin connector. VP-9007 : CardBus to IDE cable with 36 pin connector. VP-9008 : USB 1.1 to IDE cable with 36 pin connector. VP-9009 : FireWire IEEE 1394 to IDE cable with 36 pin connector.
3. Best Match (ViPowER will give several suggest for you reference). 4. Than you can get best performance on your SmartDup. 5. ViPowER will recommend several match, not only performance, but also easy to purchase from any retail chain store near by you.
Page 14
8. You can ask your retail store to purchase any brand of CD-ROM driver, which ViPowER supply or recommend. 9. CD-ROM Compatibility List CD-RW ACER 52x Afreey 52x AOpen 52x ASUS 52x LITEON 52x TEAC 40x Acer CD-ROM Model Number: CD-652P Version: ?? AOpen CD-ROM Model Number: CD-952E/TKU Version: C41 Asus CD-ROM Model Number: CD-S 950/A Version: 1.0D...