Siemens VDO E-Tacho 1323.01 Operating Instructions Manual page 10

Activate E-Tacho
• The E-Tacho gets active as soon as you turn on the ignition:
– the total kilometre reading appears in the LC display and
– the time or daily kilometre reading,
– when the light is on, the LC display, the dial graduations,
figures, and the pointer are illuminated.
• By briefly pressing the setting knob you may switch from
"time" to "daily kilometre reading" in the lower line of the
LC display.
time
• After the ignition is turned off, the indication in the LC dis-
play will go out after a brief delay.
• Briefly press the setting knob. When ignition is off: the infor-
mation will appear for approx. two seconds in the LC display
(not for device type 1323.03).
10
daily kilometre reading
E-Tacho 1323