System Board; Removing The System Board - Dell Alienware m17 R3 Service Manual

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 2230 solid-state drive in M.2 slot
4. Remove the 2280 solid-state drive in M.2 slot
5. Remove the 2230 solid-state drive in M.2 slot
6. Remove the 2280 solid-state drive in M.2 slot
7. Remove the rear I/O-cover.
8. Remove the battery.
About this task
The following image indicates the location of the system board and provides a visual representation of the removal procedure.
Before working inside your
one, if installed.
one, if installed.
two, if installed.
two, if installed.
computer.
45