Advertisement
Water Tank Repositioning
Flip Brewer Over
Remove the drip tray and
the water tank and set
them aside. On a flat surface,
carefully turn the brewer
over so the base is facing up.
You will see two parts: the
water tank base (Part B)
and the locking tab (Part A).
Caring For Your Brewer
Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.
Brewer Exterior
Keep your Keurig® brewer looking its
ADD WATER
DESCALE
6oz
12oz
best by cleaning the exterior from
8oz
10 oz
time to time. Just clean with a damp,
soapy, lint-free, non-abrasive cloth.
Never immerse the brewer in water or
other liquids.
Drip Tray
The drip tray can hold up to 8 ounces
of overflow and should be emptied
and cleaned occasionally. To remove,
slide it toward you, keeping it level to
avoid spilling. Rinse and clean with a
damp, soapy, lint-free, non-abrasive
cloth.
2
Remove Part A
Slide Part A out of the
brewer. It should release
freely with little resistance.
ADD WATER
DESCALE
6oz
12oz
8oz
10 oz
3
Lift, Pivot Part B
Next re-position part B.
• Gently pull outward to
disengage from the brewer.
• Rotate upward, as shown
above. Part B will remain
attached to the brewer.
• Part B should now pivot
freely to the second position.
Remember to move the power
card, so it does not get caught.
Water Reservoir
The water reservoir should be
cleaned periodically by wiping the
inside of the reservoir and underside
of the lid with a damp, non-abrasive,
lint free cloth. Do not dry the inside
6
of the water reservoir with a cloth as
oz
lint may remain. Allow the reservoir
8
oz
10
oz
to dry completely.
Regular Maintenance
For great-tasting coffee, keep your brewer running at peak
performance by following the recommended maintenance
schedule:
*To turn off Descale notification, follow the full descaling procedure as outlined
in the Use & Care Guide
Insert B, Replace
Replace Part B in its new
position. Rotate downward so
that B is parallel to the base,
then slide B back into position.
Remember to replace the
power cord.
Slide Part A back into the
second position to lock B in
place. Flip the brewer back
upright.
You are now ready to use your
Keurig Brewer!
12
oz
4
A
Advertisement
