Advertisement
Before You Brew
1
Plug & Place
Remove packing tape from brewer.
Plug into a grounded outlet.
Place a large mug (10oz minimum)
on the drip tray.
NOTE: If changing water tank position to the back,
please complete before first brew (refer to instructions
included).
3
Lift & Lower
Lift and lower the handle. Do not
insert a K-Cup® pod. The brewer will
power on automatically.
Brew Your First Cup
5
Place Mug & Pod
Place a mug on the drip tray. If using a
travel mug, remove the drip tray and
place the mug on the drip tray base.
Lift the handle and place a K-Cup® pod
in the K-Cup® pod holder. Lower the
handle completely to close the lid.
Do not remove the foil lid on the
K-Cup® pod.
For bolder coffee press the STRONG button,
followed by the brew button.
For iced beverages fill a large plastic tumbler
with ice. Insert any K-Cup® pod, then press the
OVER ICE button, followed by brew button."
NOTE: choose a tumbler large enough to accommodate both the ice
and dispensed liquid to prevent overflow.
Multi-position Water Reservoir
Position along the left or back of the brewer to
optimize counter space.
ATTENTION!
This brewer is only compatible with newly designed
Keurig® My K-Cup® Universal Reusable Coffee Filter.
Do not attempt to use any other reusable filter or
previous versions of Keurig® My K-Cup® Universal
Reusable Coffee Filter; may cause damage
to brewer.
2
Power Button
Over Ice
1
2
3
Remove the water reservoir lid, then
4oz
12oz
6oz
10 oz
8oz
lift the reservoir straight up to remove
it. If you have a Keurig
install it now. Refer to your Water
Filter Starter Kit for instructions.
Rinse reservoir with fresh water and
fill to the MAX FILL line.
Replace water reservoir. Replace lid.
NOTE: Do not use distilled water.
4
The 4 cup sizes will blink. Press the 8oz
button, then press the blinking brew
button to start a cleansing brew. Pour
the hot water into the sink.
The one-time setup process is now
complete and you are ready to brew!
6
The 4 brew size buttons will blink.
Select your brew size, then press the
blinking brew button. For a stronger
coffee, press the STRONG button
before brewing. The brew button will
remain illuminated while brewing.
Brewing is complete when the buttons
are no longer illuminated. Lift the
handle and dispose of the K-Cup
CAUTION: While brewing, there is extremely hot water
in the K-Cup® pod holder. To avoid injury, do not lift the
handle during the brewing process.
Brewer Features
Smart Start heats then brews in one simple process. No need
to wait for the brewer to heat before selecting brew size. Simply
power on your brewer by lifting the handle, add a K-Cup
select your brew size, then press the brew button. The brewer will
heat, then automatically begin brewing.
Auto Off automatically turns your brewer off 5 minutes after the
last brew for energy savings.
High Altitude To ensure your brewer works properly at higher
altitudes (5,000 feet), enable the High Altitude setting by
pressing and holding the brew button and 8oz buttons for
3 seconds.
Strong Brew for a bolder, more intense cup.
Over Ice brew your favorite beverages over ice.
Rinse & Fill
Water Filter,
®
Cleansing Brew
Brew & Enjoy!
Brew Button
6
oz
12
oz
1
8
oz
10
oz
Brew Button
6
oz
12
oz
8
oz
10
oz
pod.
®
Pod,
®
Advertisement
