Attaching The Block To The Graphics Card - ekwb EK-Pro GPU WB RTX 6000 – Ni + Inox Installation Manual

STEP 2
M2.5 x 6

ATTACHING THE BLOCK TO THE GRAPHICS CARD

M2.5 x 4
Use a Phillips head screwdriver with the enclosed M2.5X4 and
M2.5X6 screws. EK recommends you start tightening the screws
evenly, around the GPU core first, and then continuing outward to
Plastic Washer
prevent the damage to the GPU. Always use a plastic washer under
each screw!
M2.5 x 4
M2.5 x 6
STEP 2
M2.5 x 4 AX1 M2.5 x 6 AX1 M 2.5 PVC Washer
11 pcs 4 pcs 15 pcs
Phillips Screwdriver
- 7 -