Table Of Contents - GE Monogram ZFSB27DYSS Installation Instructions Manual

Before you begin-Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector's use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the
Consumer.
NOTE TO CONSUMER: Keep these instructions with your Use and Care
Book for future reference.
• Bucket
Tools
• Safety glasses
Required
• Water shut-off valve
Materials
Required
For proper installation, this refrigerator must be placed on a level surface of hard material that
Flooring
is at the same height as the rest of the flooring. This surface should be strong enough to
support a fully loaded refrigerator.
CAUTION: Protect the finish of the flooring. Cut a large section of the cardboard carton and
place under the refrigerator while you are working.
Installation Preparation
Contents
Installation
(recommended)
Water Connection Location, Electrical ...................... 3
Product Dimensions & Clearances ............................. 3
Grounding the Refrigerator ....................................... 4
Step 1, Remove Packaging .......................................... 5
Step 2, Install Water Line ............................................ 6
Step 3, Connect Water Supply .................................... 6
Step 4, Connect Power ................................................ 7
Step 5, Start Icemaker ................................................. 7
Step 6, Roll Refrigerator into Position ....................... 7
Step 7, Level The Refrigerator ................................... 7
• Tubing cutter
• Tin snips
• Water filter
WR97X0214
(recommended)
• Drill and appropriate bits
• Copper tubing
• 1/4" O.D. Compression nuts
and 2 ferrules (sleeves)
2