Secondary Receiver Audio Accessory
When a secondary accessory is plugged into the audio jack, audio will
be routed through secondary accessory
Attaching Secondary Receiver Audio Accessory
Lift up the dust cover and rotate 90
slot. Insert the secondary receiver audio accessory to 3.5 mm audio
Figure 2.11: Attaching secondary receiver audio accessory
. Plug the dust cover to the housing
Table 2.8: Optional Accessories
Earpiece with Coiled Cord and 3.5 mm RT Angle
Receiver Earbud for Remote Speaker Microphone
Some part numbers may have regional prefix such as AA,
MD or AZ.
Failure Detected Indication and Handling
Any product error is indicated by alternating Red and Green blinks and
a failure detected indication (tone / voice prompt) will be heard. A few
seconds later the WRSM will recover.
If at any time the wireless connection cannot be re-established, or the
WRSM is operating incorrectly:
Power cycle the WRSM and the two-way radio.
Refer to "Pairing Your WRSM" on page 10" to repeat the connection