Reading Codes - Black & Decker Smart Scan AD925 Instruction Manual

5. The Code Summary Screen appears.
The Summary Screen appears indicating how many codes were found. You must
scroll down to view all the diagnostic codes.
If no Diagnostic Trouble Codes were found, the Tool will display "No Codes"
NOTE:
and point at the Green Urgency Rating.
6. To view the diagnostic codes about the vehicle press:
READ/Scroll Down key or the
ERASE/Scroll Up key.
7. If you wish, you can rescan the vehicle.
Press and hold the READ/Scroll Down key for 3 seconds. Then repeat the instructions
from step 5.

Reading Codes

Diagnostic Trouble Codes are used to help determine the cause of a problem or
problems with a vehicle. Diagnostic Trouble Codes are set when a fault is present for a
sufficient amount of time.
Urgency Ratings
An Urgency Rating (indicated by a
URGENCY RATING
1
2
3
4
) is provided for each Diagnostic Trouble Code:
COLOR COURSE OF ACTION
Green No Trouble Codes present.
Yellow Repair within a few days - not
(Attention) dangerous to vehicle.
Orange Get to a repair shop at your
(Caution) earliest convenience so no
further damage will be done
to your vehicle.
Red Immediate repair must be
(Urgent) done to prevent further damage.
6