Daikin RKM46QVMA Service Manual page 22

Compressor
Step
2 Remove the terminal
cover.
3 Remove the protection
bushing.
4 Disconnect the
compressor lead wires
and the overload
protector.
5 Heat up the brazed part
of the discharge side
pipe and disconnect it.
6 Heat up the brazed part
of the suction side pipe
and disconnect it.
7 Remove the 2 nuts of
the compressor.
8 Lift up the compressor
and remove it.
20
Procedure
Protection bushing
Overload
protector
Brazed part of the
discharge side pipe
Compressor
Terminal cover
(R23218)
U (red)
V (yellow)
W (blue)
(R22244)
Brazed part of the
suction side pipe
Nut
(R23220)
Si001654EA
Points
For RX(K)M71QVMA, the
wiring of the compressor
lead wires is slightly
different.
V (yellow)
U (red)
W (blue)
(R24119)
Removal Procedure