Onboard Charging - Enovate Medical ENCORE ECOFLEX Quick Start Manual

ONBOARD CHARGING

The Encore EcoFlex MobiusPower Plus can charge the Mobius battery while the battery is in the holster. To begin
charging your Encore, plug the 3-prong power cable into a standard 110-120VAC grounded AC power outlet. You will
observe the follow messages on the LCD when the AC cord is connected.
Please unplug the workstation from the AC Power outlet prior to moving it.
AUTOMATIC UPDATES
Your Encore Ecoflex workstation will receive periocdic updates. The automatic update window is between 2:00AM -
4:00AM EST. The workstation wil reboot after installing the update which will indirectly cause the PC to power off and
then back on.
WWW.ENOVATEMEDICA.COM
When AC power is connected, and the battery is fully charged
When AC power is connected, and the battery is not fully charged
If an asterisk is present, as in, "AC Plugged In, Charging* xxx%,"
the charger is enabled, but is cooling off for 10-30 minutes
STANDBY MODE
The Encore EcoFlex Mobius Power plus workstation is designed to
enter Standby Mode when the battery is near depletion (1% charge or
less). In Standby Mode the LCD back lights will be off. All peripherals
powered by the workstation, including the PC and the monitor, will
also be powered off in Standby Mode. The blue LED power indicator
on the power button will remain illuminated while the workstation is
in Standby Mode.
Replace the Mobius battery to bring the workstation out of Standby
mode and resume normal functionality.
If the workstation is an Ecoflex Encore Plus, you have the option of
powering the workstation via AC and charging the battery as well.
Please refer to "Charging" for additional details regarding charging
the EcoFlex Encore Plus.
Encore ecoflex quickstart guide QS009-Rev 001-5.5.20
7