Replace The Top Uv Lamp; Replace The Cool Water Out Uv Lamp - ECOLOBLUE 30 Series Manual

B. Replace the top UV1 lamp
Switch the power OFF and unplug Appliance (Figure 13, page 20).
1
2 Wait for 10 minutes to allow the UV to cool down.
Remove the screws at the back of the top cover and put them in a secure location.
3
Remove the cover (Figure 21). 1st time replacement requires cutting security tape.
(Figure 28)
4 Remove the screws securing the lamp (Figure 22).
5 Disconnect UV connection wire (Figure 23).
6 Pull gently on wires to release silicone plug and remove the UV bulb (Figure 23).
7 Replace with new bulb.
8 Reassemble parts in reverse order and close cover.
Plug in the Appliance and turn the power ON ( Figure 13, page 20).
9
Figure 20
Figure 22
C. Replace the cool water out UV2 lamp
Switch the power OFF and unplug Appliance (Figure 17, Page 20).
1
2 Wait for 10 minutes to allow the UV to cool down.
Remove the screws at the back of the top cover and put them in a secure location.
3
Remove the cover (Figure 22 and 23, page 20).
24
www. EcoloBlue.com | 800-691-6043 | 1-925-231-0206
Figure 21
Figure 23