Additional Display Options And Settings - ECOLOBLUE 30 Series Manual

Additional Display Options
(10)
+
(11)
12
Press and HOLD the MODE button to enter the OPTION MENU.
After beep, press MODE button to scroll through the OPTION MENU.
Change the OPTION you choose by pressing SET button.
Inactivity will result in OPTION MENU exit.
1. Change the Time.
00-00: Press SET button until hour flashes. To change the HOUR press SET button.
Switch to MINUTE by pressing the MODE button and change the MINUTE by pressing
SET button.
2. Timer - To Set Water Generation Time.
T-ON/OFF: By default the timer is set to off and will continue to generate water. To
schedule water generation press SET button to change setting to T--ON. See 3&4 for
time programming.
NOTE: To initiate Timer Option, Water Generation must be set to OFF. See 5.
3. **-** Displays START TIME for pre-set automatic water generation. Press SET
button until hour flashes. To change the HOUR press SET button. Switch to MINUTE by
pressing the MODE button and change the MINUTE by pressing SET button.
4. **/** Displays END TIME for pre-set automatic water generation. Press SET but-
ton until hour flashes. To change the HOUR press SET button. Switch to MINUTE by
pressing the MODE button and change the MINUTE by pressing SET button.
5. W--ON: water generation function ON. W-OFF: water generation function OFF.
6. H--ON: heating function is ON. H-OFF: heating function is OFF.
7. C--ON: cooling function ON. C-OFF: cooling function OFF.
8. H-075~095: displays the pre-set Celsius temperature of hot water.
Can be changed to Fahrenheit see 11. Adjust the temperature by pressing the SET but-
ton. The temperature is ranges between 75°~95° Celsius; 167°~203° Fahrenheit.
9. C-004~010: displays the pre-set temperature of cold water.
Adjust the temperature by pressing the SET button. The temperature is limited be-
tween 4°~10° Celsius; 39°~50° Fahrenheit.
10. FD***: displays filter use. Press SET button to reset filter counter.
11. C/F-C: Temperature in Celcius. C/F-F: Temperature in Fahrenheit. This option is
located after all of the Temperature options.
12. RESET: Press SET button to reset to factory settings.
www. EcoloBlue.com | 800-691-6043 | 1-925-231-0206