Table of Contents
Advertisement
Display
1. UV1 Warning Icon – This icon will flash when the UV1 light
needs replacement. This icon will light when the UV1 is on.
2. UV2 Warning Icon – This icon will flash when the UV2 light
needs replacement. This icon will light when the UV2 is on.
3. UV3 Warning Icon – This icon will flash when the UV3 light
needs replacement. This icon will light when the UV3 is on.
4. Top Tank Water Level Indicator – The level increases as the
amount in the tank increases.
5. Hot Water Dispenser Icon – When flashes, the hot is
UNLOCKED. Press and Hold the button to dispense the hot
water.
6. Bottom Tank Water Level Indicator – The level increases as
the
amount
in
the
7. Hot Water Temperature – the indicator displays current
temperature
of
hot
8. Power ON/OFF Icon – Press and HOLD to start-up or shut off
the
Appliance
9. Hot Water Lock Icon – Press and HOLD until you hear a beep
to "UNLOCK" the hot water dispense
10.Mode Selection Icon - Press and HOLD until a beep sounds.
Press mode to scroll through options
11.Setting Button – In the Mode Menu, use Set to change the
selected option. Also used as a -/decrease button in selected
settings.
12.Setting Button – In the Mode Menu, use Set to change the
selected option. Also used as a +/increase button in selected
settings.
tank
increases
water
www. EcoloBlue.com | 800-691-6043 | 1-925-231-0206
13. Cold Water Temperature - the indicator displays current
temperature of cold water
14. Info Display Icon - Displays the current relative humidity,
temperature and time.
15. Cold Water Out Icon - Press AND HOLD the button to
dispense the cold water.
16. Water Leak Warning icon - System is detecting a leak when
.
this icon flashes. Please see Troubleshooting page.
17. defrost Icon - The unit is in the defrosting process when this
icon flashes (frost can occur because of low temperature and or
dry air in some areas).
18. Water recirculation/Reflux Icon - Water is recirculating in
.
the top tank when this icon flashes.
19. Cooling Water Icon - Cooling function is activated when the
.
icon is lit. A flashing icon indicates a change in temperature is
occuring.
.
20. Heating Icon - Heating function is activated when the icon is
lit. A flashing icon indicates a change in temperature is occuring.
.
21. Booster Pump Icon – The pump is on when this icon spins.
22. Filter Replace Warning – Normally the icon stays lit.
.
23. Water Generation Icon – The unit is generating water when
this icon in animated (raindrops falling). When the icon is
flashing the water generation is off. When icon stays on (no
flashing), the generation is on but water is not generating.
11
Hide quick links:
Advertisement
Table of Contents
