Reverse Osmosis Filter Installation - ECOLOBLUE 30 Series Manual

Always wash your hands thoroughly and wear latex or other hygienic gloves when
performing maintenance on the Appliance to minimize the risk of contamination of internal
CAUTION!
parts.

Reverse Osmosis Filter Installation

1 Install the Reverse Osmosis Filter (found in the foam packaging) as described below:
2 Open the bottom front panel of the Appliance by carefully opening the front panel from
the left. (Figure 3).
3 Locate the empty filter space. (Figure 4).
4 Gently pull filter cap towards you. (Figure 5).
5 Remove the RO filter from the packaging.
Install the RO Filter in the proper orientation. (Figure 6-8).
6
7 Close the front panel
Open the bottom front panel.
Remove RO filter from packaging.
16
Figure 3
Figure 5
www. EcoloBlue.com | 800-691-6043 | 1-925-231-0206
Figure 4
Gently pull filter cap towards you.
Figure 6
Push RO filter up into cap.