SINAMICS S120 Fail-Safe Drives
Description
Enter Drive_1 under Drive group_1
and Drive_2 under Drive group_2.
Interconnect input F-DI3 to
"Acknowledge internal event". The
falling edge at this input resets the
"Internal event" status in the drives.
Then, re-close the configuration
window.
Under "Inputs" you will obtain an
overview of the states of the F-DIs
connected to the TM54F.
For this particular function example,
all of the fail-safe inputs used should
be parameterized as NC/NC contact.
I DT Safety Integrated
Page 35/43
Entry ID: 28424136
Comment
MC-FE-I-005-V11-EN