FSP Technology Proline 3/1 Series User Manual page 8

Terminal Block wiring diagram of 30K(L)
Terminal Block wiring diagram of 10KR/10KRL
Terminal Block wiring diagram of 15KR(L)/20KR(L)
NOTE 1: Make sure that the wires are connected tightly with the terminals.
NOTE 2: There are two kinds of outputs: output terminal/outlets and programmable terminal. Please
connect non-critical devices to the programmable terminal and critical devices to the output terminal/outlets.
During power failure, you may extend the backup time to critical devices by setting shorter backup time for
non-critical devices.
NOTE 3: Please install the output breaker between the output terminal and the load, and the breaker
should be qualified with leakage current protective function if necessary.
6) Put the terminal block cover back to the rear panel of the UPS.
10