Compliance - ADS-tec IRF2000 Series Instruction Manual

IRF2000 series - standard

2.8 Compliance

The manufacturer hereby declares that this device has been marked with the CE mark in accordance
with the basic requirements and other relevant conditions of the following European Directives:
2011/65/EU, RoHS Directive
•
• 2014/30/EU, EMC Directive
2014/53/EU, RED Directive
•
2014/35/EU, Low Voltage Directive
•
A corresponding EU conformity declaration is available for competent authorities at the manufacturer
and can be viewed upon request.
The EU conformity declaration can be requested at
http://www.ads-tec.de/en/support/support-request.html
tec.de/en/support/download/industrial-it/ec-declaration-of-conformity.html
Recommendation for use:
For full compliance with the EMC legislation, all components and cables used for
device connection must also be compliant with these requirements. It is therefore
necessary to employ BUS and LAN cables with shielded connectors and these
must be installed as per the instructions contained in the instruction manual.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Doc v2.7
and is available for download at
9
http://www.ads-