Operating And Safety Instructions - ADS-tec IRF2000 Series Instruction Manual

IRF2000 series - standard

3 Operating and safety instructions

The device operates under electrical voltage and contains highly sensitive components. Intervention by
the user is required only for connecting the power supply lines. Should any further modifications be
required, it is necessary to consult either with the manufacturer directly or with service personnel
authorised by the manufacturer. The device must be de-energised during work. Appropriate measures
must be taken to prevent electrostatic discharges on components. If the device is opened up by an
unauthorised person, the user may be subject to hazards and the warranty is invalidated.
General information
Assembly, commissioning and operation may only be performed by qualified and
trained personnel
The safety notices and the instruction manual are to be observed by all persons
who work with the device
At the installation site the valid guidelines and regulations for accident prevention
must be observed
The instruction manual contains the most important information for safely
operating the device
Appropriate storage, proper transport, installation and commissioning, as well as
careful operation are prerequisites for ensuring safe and proper operation of the
device
Recommendation for use:
Only the original ADS-TEC firmware / software is allowed for any of the settings
and features described in this instruction manual. Loading of any firmware /
software that has not been released by ADS-TEC invalidates the warranty.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Doc v2.7 11