Usb Connections; Smartcard Reader In Accordance With Iso 7816 - ADS-tec IRF2000 Series Instruction Manual

IRF2000 series - standard

6.4.7 USB connections

The USB interfaces comply with the USB 2.0 standard.
Pin
1
2
3
4

6.4.8 Smartcard reader in accordance with ISO 7816

The smartcard reader is used to store configuration data.
Pin
1
2
3
4
5
6
7
8
Recommendation for use:
Configurations of a device can be saved using the Smartcard. If service is
required, the saved configuration can be transferred to the new device. The
setup procedure does not need to be repeated.
Further information can be found at:
http://www.ads-tec.de/industrial-it/firewalls-und-router/irf2000-
serie/download.html
Complex IT infrastructures with a large number of devices can be managed, monitored and controlled
easily and conveniently using Big-LinX. The Smartcard is available in the package with Big-LinX or as
an individual accessory part. Further information on Big-LinX can be found at:
http://www.ads-tec.de/industrial-it/cloud-big-linx/big-linx.html
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Doc v2.7
Signal
VDC
D -
D +
GND
Signal
VCC 5 volt
RESET
CLOCK
NC
GND
NC
I/O
NC
34