Korg KARMA Frequently Asked Questions Manual page 46

(3.1-1a/2a) [Menu]-[Prm1]-[MIDI..8/16] -> Set Status to EXT or EX2 for
any tracks you want disabled in the Karma, but to still send MIDI data to
external devices. Check the manual for the differences between the two.
Parameter Guide, Page 82.
17. How can I use an external device to trigger the RPPR
function?
In the Karma, you play on the keyboard to trigger the RPPR. This is in
Sequence Mode, and the default track in Sequence Mode is Track 01,
which is generally set to Channel 01.
To trigger this via an external synth, you would do this:
(1) Put the Karma in external sync Mode:
(2.1-1a) Global -[Menu]-[MIDI]-MIDI Clock -> set to External
Parameter Guide, Page 137.
(2) Connect the MIDI out of the external device to the MIDI In of the
Karma.
(3) Make sure the external device is sending MIDI Clock to the Karma
(not MTC-MIDI Time Code).
(4) Send triggering (notes played/chords) from the external device on
Channel 01.
18. I want to record a track (i.e. Track 9) using just a voice from
my [external] sound module... and I can't get rid of the Track 9
voice of Karma. I've tried muting it on Karma Mix, but it still
appears during record and playback.
All you have to do is go to: (3.1-1a/2a) [Menu]-[Prm1]-[MIDI..8/16] -> Set
Status to EXT or EX2 for any tracks you want disabled in the Karma, but
to still send MIDI data to external devices. Check the manual for the
differences between the two.
Parameter Guide, Page 82.
- 46 -