Monitor Connections - Allen-Bradley 6176M-15VN User Manual

Monitor Connections

Mount the Monitor on a Bench or Tabletop
Follow these directions to mount the VESA monitor to a bench or tabletop.
1. Mount the arm to the bench or tabletop by using screws, bolts, or clamps
so the monitor cannot tip.
2. Align the VESA mounting holes in the back of the monitor with the holes
in the arm bracket.
3. Insert the four supplied VESA mounting screws through the arm brackets
and into the monitor.
Install Arm
4. Tighten the screws to secure the VESA monitor to the arm.
Use the connectors on the rear of the monitor to connect the following:
• Analog video source (HD-15 VGA connector)
• Digital video source (DVI connector)
• Serial port on a computer for the optional touchscreen interface
• USB port on a computer for the optional touchscreen interface
• USB hub device ports for connecting peripheral devices
• Power (DC input connector must be used with supplied AC power adapter)
Back of Monitor
No. Connector
1 DVI-D video input
2 HD-15 video input
3 USB Type B connection to computer
4 RS-232 input (optional)
Rockwell Automation Publication 6176M-UM001D-EN-P - December 2012
Installation
Install Monitor to Arm
Monitor Mounting Holes (4)
1 2 3 4
No. Connector
5 DC power input (AC adapter)
6 USB Type A connection to peripheral devices (2)
7 M5 ground screw
Chapter 2
5 6 7
19