Vesa Mounting - Allen-Bradley 6176M-15VN User Manual

Chapter 2 Installation
18
Figure 2 - Rack Mounting a 1950M Monitor
B
D
D
ATTENTION: The mounting rails that run vertically along the inside edges of
the front opening of an EIA-rack cabinet are either wide or universal:
• Wide rails have holes spaced 12.7 mm (0.5 in.) and 31.8 mm (1.25 in.) on
centers, in a repeating pattern. Wide rails are prevalent in Europe.
• Universal rails have holes spaced 12.7 mm (0.5 in.), 15.9 mm (0.625 in.), and
31.8 mm (1.25 in.) on centers, in a repeating pattern. The universal rails have a
hole pattern that contains the wide pattern but provides an additional hole at
the midpoint of the pattern. Universal rails are prevalent in the United States.

VESA Mounting

Use the optional bench/tabletop adapter for monitors, catalog number
6189V-MBA, to mount your VESA monitor on a bench or tabletop.
VESA Mounting Guidelines
Observe these guidelines when installing the VESA monitor on an arm:
• The mounting surface and the mounting arm must be strong enough to
support both the monitor and the mounting hardware.
• The interface between the arm and the monitor must meet VESA
FPMPMI 100 mm (3.94 in.) standards.
• The mounting location must provide adequate clearance for positioning
and moving the adjustable unit and for routing cables.
Rockwell Automation Publication 6176M-UM001D-EN-P - December 2012
A
B
D
D
C