Searching An Input Signal; Selecting An Aspect Ratio - ViewSonic PJL7211 User Manual

Operating

Searching an input signal

1.
Press SEARCH button on the remote control.
The projector will start to check its input ports in order, and
display the image of the proper signal found first.
The projector checks the selected port first. When no signal
is found in the port, the projector checks the other port.
If no proper signal is found in either port, the projector
selects the first port again.
COMPUTER IN ó VIDEO
● While ON is selected for the AUTO SEARCH item in the OPTION menu,
the projector will keep checking the ports alternately till an input signal is
detected.

Selecting an aspect ratio

1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
 For a computer signal
NORMAL  4:3  16:9  16:10
 For a video signal or component video signal
4:3  16:9  14:9
 For no signal
4:3 (fixed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
ViewSonic 6
SEARCH button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
ASPECT button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
RESET
ESC
PJL7211