Searching An Input Signal; Selecting An Aspect Ratio - ViewSonic PJ760 User Manual

Operating
Selecting an input signal (continued)
1.
Press VIDEO button on the remote control.
Each time you press the button, the projector switches its input
port as below.
COMPONENT(Y, Cb/Pb, Cr/Pr)
● If VIDEO button is pushed to switch from a signal from
COMPUTER IN1 or 2 port, when TURN ON is selected for AUTO
SEARCH item in OPTION menu
COMPONENT port fi rst. If no input is detected at the port, the projector will
check the other port in above order.

Searching an input signal

1.
Press SEARCH button on the remote control.
The projector will start to check its input ports in order to
fi nd any input signals.
When an input is found, the projector will stop searching and
display the image. If no signal is found, the projector will return to
the state selected before the operation.
COMPUTER IN 1
VIDEO

Selecting an aspect ratio

1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
For a computer signal
NORMAL
For a video signal, s-video signal or component video
signal
4:3 16:9
For no signal
4:3 (fi xed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
ViewSonic
COMPUTER IN 2
S-VIDEO COMPONENT (Y, Cb/Pb, Cr/Pr)
4:3 16:9 SMALL
14:9 SMALL
S-VIDEO
, the projector will check
40)
(
17
VIDEO
ASPECT
VIDEO
ON
OFF
FREEZE
POSITION
SEARCH
ASPECT
ON
OFF
FREEZE
POSITION
ASPECT
ASPECT
ON
OFF
FREEZE
POSITION
PJ758/PJ759/PJ760
COMPUTER
VIDEO SEARCH
BLANK
AUTO
MAGNIFY
HOME PAGE UP VOLUME
PAGE DOWN MUTE
END
MY BUTTON KEYSTONE
1 2
MENU
VIDEO COMPUTER SEARCH
BLANK
AUTO
MAGNIFY
PAGE UP VOLUME
HOME
END PAGE DOWN MUTE
MY BUTTON KEYSTONE
1 2
MENU
COMPUTER
VIDEO SEARCH
AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
PAGE DOWN MUTE
END
MY BUTTON KEYSTONE
1 2
MENU