Table of Contents
Advertisement
Quick Links
ViewSonic
PJL7200/PJL7201
PJL7202/PJL7203
LCD Projector
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service. Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found
on our web site at http://www.viewsonic.com in English, or in specific languages
using the Regional selection box in the upper right corner of our website.
"Antes de operar su equipo lea cuidadosamente las instrucciones en este manual"
®
- User Guide
Model No. : VS12186
VS12199
VS12234
Advertisement
Table of Contents
Related Manuals for ViewSonic PJL7200
Summary of Contents for ViewSonic PJL7200
- Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
- Page 2 The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic PJL7200/PJL7201/PJL7202...
- Page 3 ViewSonic PJL7200/PJL7201/PJL7202...
- Page 4 3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead). 4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic PJL7200/PJL7201/PJL7202...
- Page 5 VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
- Page 6 Projector About the Owner’s Manual Please read the owner’s manual thoroughly to ensure correct usage of the projector and its features. After reading, store the owner’s manual in a safe place for future reference. Features 1. Dress up Design 2. Designed for tough environment 3.
-
Page 7: Table Of Contents
Picture Menu (PC Mode) ..................19 Audio Menu (PC Mode) ..................20 Image Menu (PC Mode) ..................21 MENU (Video Mode) ....................22 Picture Menu (Video Mode) ..................22 Audio Menu (Video Mode) ..................23 Image Menu (Video Mode) ..................24 ViewSonic PJL7200/PJL7201/PJL7202... -
Page 8: Contents
Air Filter / Replacing the Air Filter ................ 46 Lamp / Replacing New Lamp ................. 47 Other Care / Cleaning the Lens ................48 Troubleshooting .......................49 Indicator ........................49 Error For Machine Defects ..................50 List of Supported Monitor Displays ............... 52 Appendix ViewSonic PJL7200/PJL7201/PJL7202... -
Page 9: Contents Of Your Box
Please make sure that following items are included in the box, along with the main. If any items missing, contact your dealer. 2.Remote control 1.Projector 3.Power cord 4. Computer cable 6. Quick Start Guide 5. USB Cable (1.5M) ViewSonic PJL7200/PJL7201/PJL7202... - Page 10 Safety Instructions Contents of Your Box 7. Owner’s Manual CD 8. Network Control Application CD (Optional) 9. Soft Bag ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 11: Safety Instructions
- Do not use this projector if there is no image or NO SIDEWARD sound, or if the sound is distorted. - Do not place this projector in a container Do not point the projector down to containing liquid. project an image. NO DOWNWARD ViewSonic PJL7200/PJL7201/PJL7202... -
Page 12: Safety Labels
Safety Labels Safety Labels Safety labels are used on or within the projector to alert you to items or areas requiring your attention. WARNING LABEL EMI LABEL LAMP DOOR WARNING LABEL ViewSonic PJL7200/PJL7201/PJL7202... -
Page 13: Part Names
Rotate the zoom ring until the image is the desired size. Lamp door The lamp unit is inside. Foot adjust button Lock / unlock the adjustable foot. Front adjustable foot Extend and retract to adjust the projection angle. Outlet ventilation ViewSonic PJL7200/PJL7201/PJL7202... -
Page 14: Control Panel
Display or hide the On-Screen Display Light on or flash to indicate the operating main menu page. status of the projector. BLANK 1 13 Blanks the projected image. If the projector is left in blank mode for more than 15 minutes, the projector will automatically shut down. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 16: Setting Up
9.45 5.26 4.36 17.26 14.29 7.03 5.83 23.06 19.13 8.80 7.31 28.87 23.98 10.57 8.79 34.67 28.82 Distance(M) 8.79~10.57 5.83~7.03 Image size(inch) 4.36~5.26 2.88~3.49 1.11~1.37 2.29~2.78 1.7~2.08 1.7~2.08 2.29~2.78 1.11~1.37 2.88~3.49 4.36~5.26 5.83~7.03 Image size(inch) 8.79~10.57 Distance(M) When in against at wall, leave about 20cm (7.9in.) Between thw projector and the wall. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 17: Power On / Off
4. If you don’t use the projector, remove power cord. WARNING Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 18: Setting Up The Projector
The projector supports the following four different projection methods. 3.Rear ceiling projection 1.Front projection 2.Rear projection 4.Front ceiling projection Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for details. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 19: Ceiling Mounted Installation Guide
MAX M4x8 mm For Mounting. Security Anchor The product is equipped with security anchor and PIN LOCK functions to help prevent unauthorized removal projector. WARNING ►Do not grasp the security anchor to carry projector, since it is not designed for it. ► T he security anchor is not for comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 20: Adjusting The Projector's Elevation
Release the foot adjust buttons in order to shape of the projected image to become lock the front adjustable feet. distorted. Use the keystone correction function to correct this distortion. After making sure that the front adjustable feet are locked, put the projector gently atop. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 21: How To Connect
Connect either end of the computer cable to the projector’s RGB IN. Connect the computer cable from the computer to the projector. If needed, connect the MONITOR OUT to a monitor to view input from RGB IN. Tighten the screw on all connectors. ViewSonic PJL7200/PJL7201/PJL7202... - Page 22 / off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the laptop. Press Fn and the labeledfunction key simultaneously. Refer to your laptop’s documentation to discover your laptop’s key combination. ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 23: Remote Control
3. Close the battery cover. Caution ►Avoid excessive heat and humidity. ►Do not drop the remote control. ► I f the remote control will not be used for an extended period, remove the batteries. ► D o not expose the remote control to water or moisture. This could result in malfunction. ► R eplace the battery when remote control operation becomes sluggish or unresponsive. ► D o not place the remote control close to the cooling fan of the projector. ► D o not use batteries of different types at the same time. ► D o not mix a new battery with used one. Make sure the plus and terminals are correctly aligned when loading batteries. ► D ispose of batteries in accordance with environmental laws. ► D o not disassemble the remote control. If the remote control needs service, please contact your dealer. ViewSonic PJL7200/PJL7201/PJL7202... - Page 24 Press button to move arrow direction of window. MOUSE-L / MOUSE-R The function is like mouse of desktop/ notebook. Remote control’s mouse functions only will work if the USB cable is connected (see page 15 for instructions) ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 25: Menu Operation
2. Choose which item you want to enter, you could press up / down /left/ right button of control panel or remote control to adjust item or value. Up / Down / Right / Left button Menu button ViewSonic PJL7200/PJL7201/PJL7202... -
Page 26: Menu (Pc Mode)
Adjust the color settings and makes the projected image WHITE BOARD on a (green,white, black) board more visible. BLACK BOARD MIDDLE Adjust the image color temperature level. HIGH COLOR TEMP USER User Red 000/100 User Green 000/100 User Blue 000/100 ViewSonic PJL7200/PJL7201/PJL7202... -
Page 27: Audio Menu (Pc Mode)
MENU (PC Mode) Audio Menu Step: 1. U se the ▲ /▼ buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. Item Selection Description VOLUME 00/40 Adjust the volume. DVI-I CHANNEL Y,Pb,Pr SETTING VIDEO S-VIDEO ViewSonic PJL7200/PJL7201/PJL7202... -
Page 28: Image Menu (Pc Mode)
Correct vertical keystone distortion in image manually. RESIZE 4:3, 16:9, Native AUTO SYNC EXECUTE Set all of the above setting automatically. AUTO SEARCH OFF/ON Search signal source manually or automatically. * DVI doesn’t support H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 29: Menu (Video Mode)
Adjust the color settings and makes the projected image WHITE BOARD on a (green,white, black) board more visible. BLACK BOARD COLOR TEMP MIDDLE Adjust the image color temperature level. HIGH USER User Red 000/100 User Green 000/100 User Blue 000/100 ViewSonic PJL7200/PJL7201/PJL7202... -
Page 30: Audio Menu (Video Mode)
MENU (Video Mode) Audio Menu Step: 1. U se the ▲ /▼ buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. Item Selection Description VOLUME 00/40 Adjust the volume. DVI-I CHANNEL Y,Pb,Pr SETTING VIDEO S-VIDEO ViewSonic PJL7200/PJL7201/PJL7202... -
Page 31: Image Menu (Video Mode)
Item Selection Description AUTO KEYSTONE OFF/ON Automatically Correct keystone distortion in image. KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually. RESIZE 4:3, 16:9 AUTO SEARCH OFF/ON Search signal source manually or automatically. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 32: Menu
TIMER (optional) the lamp timer. FILTER TIMER Show the filter use hour. RESET FILTER EXECUTE Reset the filter timer after cleaning or change filter. TIMER 500 HOUR FILTER Select (500 / 800 / 1000 hours) depending on the 800 HOUR COUNTER environment.(default : 500 hours). Please see as below. 1000 HOUR ViewSonic PJL7200/PJL7201/PJL7202... - Page 33 The lamp timer is the time counted after the last resetting. The usage time of the lamp is shown in the PRESENTATION Menu. Pressing the RESET button or the ► button displays a dialog. To reset the lamp time, select the RESET using the ► button. NOTE ► T he replacement warning message is set to appear after about 2000 hours of lamp use in order to maintain the initial brighreplacement message appears, replace the lamp with a new one as soon as possible, even ifit is still working. ViewSonic PJL7200/PJL7201/PJL7202...
- Page 34 Start to capture the image.(PC mode only) CAPTURE BLACK BACKGROUND BLUE Set background color. WHITE Display the captured image in original size and put in the ORIGINAL LOGO SIZE center of the screen. FULL Expend the image to full screen. ViewSonic PJL7200/PJL7201/PJL7202...
- Page 35 You can see the red frame to select captured area. Image Use 4 direction buttons to adjust the position of the frame. Press “MENU” to start capturing and display a dialog. Logo Capture In Progress. NOTE ►To capture an image is available only in computer mode. ►The area that can be captured is 512 x 384 dots. ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 36: Option Menu
CEILING EXECUTE upside down. Mirror the image horizontally, only for projecting onto rear REAR EXECUTE projection screen. CEILING AND Mirror the image horizontally and vertically. Projecting onto EXECUTE REAR a rear projection screen while projector is upside down. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 37: Advanced Menu
15 MINUTES BLANK OFF 30 MINUTES Choose when image is blank off. 60 MINUTES 15 MINUTES NO SIGNAL OFF 30 MINUTES Turn off when no signal is received. 60 MINUTES AUTO ON OFF / ON Turn on lamp automatically. ViewSonic PJL7200/PJL7201/PJL7202... - Page 38 “Appendix”. (4) To avoid unnecessary trouble, if you activate the [PIN Lock Protection], it is highly recommended that you write down the PIN code and store it in a safe place. ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 39: Pin Key In Operation
If the PIN is incorrect, a ‘ Enter new code ” message will be shown. Please try again. If the PIN code input is incorrect for three times, a warning message will show up and the projector will shut itself down in 30 seconds. If you have no idea about the PIN, please contact your dealer for help. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 40: Network Control Software Application (Optional)
To monitor and control the projector(including stand-by mode), the following conditions need to be ready: (1) Projector should already be powered on. (2) Projector is connected to network. (3) LED light of the projector network port shows normal. (Green light on, Orange twinkle) * Stand-by mode indictor: Green LED (Power) on the projector’s control panel flashes. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 41: Before Use
(3) Make sure the computer and projector can connect to network. Network Control software needs to arrange in TCP/IP network communication and the network cable. Open Network Control Software C lick Network control software icon. M onitor window will show as Graph 1 and Table 2. <Graph 1> ViewSonic PJL7200/PJL7201/PJL7202... -
Page 42: Projector Auto Search
(search again), the projector which is well connected with a PC will be shown. (Graph3) <Graph 3> C lick (register projector), the projector information will show on the monitor window. Click button (exit), it will cancel the registered item then return to register table. <Graph 4-1> Monitor window ViewSonic PJL7200/PJL7201/PJL7202... - Page 43 (Data single capture) in the tool bar or click button (Start Auto Scan) running in this program to monitor the projector. NOTE When pressing “About ” button for help, you will see icons explained as in the chart below. ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 44: Modify The Projector Setting
Show the Gateway Show up the MAC code (The default value can not be modified) Show up the projector monitor status Monitor (The default set in power on status) Capture IP address from network sensor DHCP automatically. < Table 3 > : Setting Windows ViewSonic PJL7200/PJL7201/PJL7202... -
Page 45: Registering And Configuring The Projector
Registering And Configuring The Projector Registering And Configuring The Projector Delete S elect the registered projector in monitor window. Click mouse right key and select “ Delete ” to erase the registered projector data. < Graph 6 > : Register Table. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 46: Projector Setting
S elect the registered projector in monitor window. Click mouse right key and select “ projector setting ” to modify the registered projector data. After finishing the setting, you can save by clicking button or cancel by clicking button. < Graph 7 > : Register table. < Graph 8 > :Setting table. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 47: System Setting / Monitor / Default Setting / Auto Detect Optimal Setting
Registering And Configuring The Projector Projector Setting Click button (system setting) to modify system alert setting. < Graph 9 > <Graph 10> :Setting table. ViewSonic PJL7200/PJL7201/PJL7202... - Page 48 Table 6. < Table 5 > Auto Detect Optimal Setting Projector Number (Sets) Timer Interval (Minutes) 1~25 1/3/5/10 * The maximum quantity of projector monitored is 255. 26~50 3/5/10 51~100 5/10 < Table 6 > 101~255 10> ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 49: Link
S elect the registered projector in monitor window. Click mouse right key and select “ Link ” to show up the control panel table and the projector connected status. < Graph 12 > : The control panel table ViewSonic PJL7200/PJL7201/PJL7202... -
Page 50: Control Panel Window Introduction
Video S-Video Y,Pb,Pr DVI-I RGB 1 Change Input Source F unction Key Icon Name Icon Name Freeze Down Blank Left Keystone Correction + Right Keystone Correction - Menu Increase Brightness Auto Sync Decrease Brightness Mute Higher Contrast ViewSonic PJL7200/PJL7201/PJL7202... -
Page 51: Function Key / Projector Status
Control Panel Window Introduction Function Key Icon Name Lower Contrast Zoom In Zoom Out Volume Up Volume Down Projector Status Icon Name System Status Input Source Status Lamp Timer Air Filter Timer ViewSonic PJL7200/PJL7201/PJL7202... -
Page 52: Network Control Window Introduction
Auto Search register and modify the setting. Open Project File Open project file which was saved. Save Project File Save the registered projector in this project. System Setting Setting the projector system remind message. About Icon content description. Exit Exit the Network software. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 53: Maintenance Of Projector
When a warning message appears to remind you to clean the air filter, please replace a new one as soon as possible. Please check and clean the air filter periodically. Replacing the Air Filter When the use time reaches the filter counter time, the projector will display a message that indicates to replace a new filter. If there is no spare air filter available, please contact your dealer. New one Turn off the projector, and unplug the power cord. Allow the projector to sufficiently cool down. Remove the filter cover from the right side of projector. Pull out the air filter. Install a new air filter. Put the filter cover on. Reset filter timer after cleaning or changing air filter. (P.25) ViewSonic PJL7200/PJL7201/PJL7202... -
Page 54: Lamp / Replacing New Lamp
2. Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out the lamp straight off the projector. 3. Insert new lamp, lock the lamp door firmly with 2 screws. 4. Put the lamp door on. 5. Please reset the lamp timer after replacing lamp. (P.26) AC IN ViewSonic PJL7200/PJL7201/PJL7202... -
Page 55: Other Care / Cleaning The Lens
- Before maintenance, make sure the power cable is unplugged, allow the projector to cool sufficiently. The high temperature state of the projector could cause a burn in and/or malfunction to the projector. -Never try to maintain the inside of the projector by yourself - Avoid wetting the projector or inserting liquids in the projector. This could result in a fire, an electric shock, and/or malfunction to the projector. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 56: Troubleshooting
2. Check the cleanliness of the air filter. The lamp does not light. Come Blinking In Blinking In Lamp fail back to “ stand by mode ”, and Green (Slow) (Slow) press the power button. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 57: Error For Machine Defects
The lamp is near the end of its service life. Replace with a new lamp. The projection lens is not focused. Adjust the focus using the focus ring. Video is blurred The lens is dirty or misty. Clean the lens. ViewSonic PJL7200/PJL7201/PJL7202... - Page 58 Mute is turned on. Press the MUTE button. No battery. Before using the remote control, please check the battery of remote Remote control is control. not working. Remote signal is obstructed. Remove the obstacle between projector and remote control. ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 59: List Of Supported Monitor Displays
1400x1050 UXGA 1600x1200 1280x1024 / 640x480 832x624 1024x768 1152x870 Component (Y,Pb,Pr) Signal Refresh Rate (Hz) Resolution (dots) SDTV(480i) 720x480 SDTV(480p) 720x480 HDTV(720p) 1280x720 HDTV(1080i) 1920x1080 Composite / S-Video Signal Refresh Rate (Hz) Resolution (dots) TV(NTSC) 720x480 TV(PAL,SECAM) 720x576 ViewSonic PJL7200/PJL7201/PJL7202... -
Page 60: Appendix
AUDIO 1 S-VIDEO AUDIO 2 AUDIO 3 MUTE H POSITION V POSITION PHASE FREQUENCY IMAGE AUTO KEYSTONE V KEYSTONE RESIZE 16:9 NATIVE AUTO SYNC AUTO SEARCH *DVI doesn’t support H / V POSITION, PHASE, FREQUENCY, AUTO SYNC function. ViewSonic PJL7200/PJL7201/PJL7202... - Page 61 AUTO CEILING FRONT CEILING REAR CEILING AND REAR ON 1 PIN LOCK PROTECTION ON 2 SECURITY MODIFY PIN 15 MINUTES 30 MINUTES BLANK OFF ADVANCED 60 MINUTES 15 MINUTES NO SIGNAL OFF 30 MINUTES 60 MINUTES AUTO ON ViewSonic PJL7200/PJL7201/PJL7202...
- Page 62 AUDIO 2 DVI-I AUDIO 3 MUTE AUDIO 1 Y,Pb,Pr AUDIO 2 AUDIO 3 MUTE AUDIO 1 VIDEO AUDIO 2 AUDIO 3 MUTE AUDIO 1 S-VIDEO AUDIO 2 AUDIO 3 MUTE AUTO KEYSTONE IMAGE V KEYSTONE RESIZE 16:9 Auto Search ViewSonic PJL7200/PJL7201/PJL7202...
- Page 63 CEILING AND REAR ON 1 PIN LOCK PROTECTION ON 2 SECURITY MODIFY PIN C.C1 C.C2 CLOSED CAPTION C.C3 C.C4 ADVANCED 15 MINUTES 30 MINUTES BLANK OFF 60 MINUTES 15 MINUTES NO SIGNAL OFF 30 MINUTES 60 MINUTES ViewSonic PJL7200/PJL7201/PJL7202 AUTO ON...
- Page 64 Appendix Appearance 102.5 100.56 97.2 ViewSonic PJL7200/PJL7201/PJL7202...
- Page 65 GND 5 GND 5 Command Transference Protocol TYPE1 Code : Example: Power ON command is sent to the projector with a CR, the projector returns a “06” code. Command (ASII) C 0 0 CR Projector Processing Command ViewSonic PJL7200/PJL7201/PJL7202...
- Page 66 C96(43 39 36 0D) BRIGHTNESS- C97(43 39 37 0D) BLANK C98(43 39 38 0D) KEYSTONE+ C99(43 39 39 0D) KEYSTONE- CR0(43 52 30 0D) POWER-STATUS STATUS feedback ″ 000 ″-projector is on ″ 800 ″-projector is standby ″ 200 ″-projector is cooling down ″ 500 ″-projector is warm up CR1(43 52 31 0D) SOURCE-STATUS STATUS feedback ″ 001 ″-RGB ViewSonic PJL7200/PJL7201/PJL7202...
- Page 67 Appendix IR Control Code Custom Code : 0x6A Data Code DATA CODE POWER 0x00 INPUT 0x11 MENU 0x27 0x14 LEFT 0x16 RIGHT 0x18 DOWN 0x19 MUTE 0x13 BLANK 0x23 AUTO 0x1F ViewSonic PJL7200/PJL7201/PJL7202...
- Page 68 Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ T= 0800 53458 soporte@viewsonic.com...
- Page 69 Europe: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase. Other regions or countries: Please check with your local dealer or local ViewSonic office for the warranty information.
- Page 70 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon...
- Page 71 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience,...
- Page 72 ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea Canyon Road, Walnut, CA. 91789 USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico Fax: 1-800-685-7276 E-Mail: http://www.viewsonic.com 4.3: ViewSonic Mexico Limited Warranty PRJ_LW03 Rev. 1A 06-25-07 ViewSonic PJL7200/PJL7201/PJL7202...
Need help?
Do you have a question about the PJL7200 and is the answer not in the manual?
Questions and answers