Timex iConnect Pro User Manual page 8

measurement will start. "- -" is shown on screen when the watch starts the measurement.
The measurement will take about 40sec to come up with a stable value to be displayed on
the screen, which will be indicated with vibration on the watch. If no value is displayed,
please return to menu and re-enter the heart rate measurement interface and try again.
4.3.3 Message
After pairing the watch to the phone, notifications from your phone will be sent to your
watch. It is necessary to switch on the supported message sending software in the App in
advance in the "Notification Settings" page.
Please note that the notifications are shown in characters but not in word. Emojis are not
supported on notifications.
4.3.4 Sleep
(1) Function introduction: The watch will display the user's sleep time of the previous night.
The default sleep measuring period is from 21:30 of current day to 12:00 of next day.
(2) Check measured Sleeping time: Drag the TOD screen to the right side. Tap on the Sleep
icon to enter the sleep interface. "Monitoring......" on the screen indicating the watch is still
measuring the sleeping time. Once the watch detects valid activity after sleep, the sleeping
time counting will stop and the measured sleep time of the previous night will be displayed
on the screen.
4.3.5 Weather
After connected with iConnect By Timex 2, the watch will show the local weather and
temperature.
4.3.6 Sports Mode
Single tapping the "Sports Mode" in the menu allows you to enter sports mode which
7