K-array KS5 User Manual page 14

KS5
LED
PRESET
INFO
9. REMOTE CONTROL - K-FRAMEWORK
All DSP functions, including system EQ and delay, can be controlled using the K-framework software.
The K-framework software and its user guide can be downloaded from our website at
array.com/software_download
On the Home page click on LED to switch on/off the LED
situated at the front of the unit.
The Preset page allows users to load presets stored on-
board.
The Info page contains information about the current
software and firmware, the current preset loaded and the
Board ID of the device.
The Board ID is a number which identifies the device when
it is connected in a K-framework network (see Paragraph
7.6). Make sure that each device in the network has a
different ID number.
Ver. 1.3
http://www.k-
14