Cleaning And Maintenance; What If There Are Problems - Beurer BF 720 Instructions For Use Manual

Deleting individual users
Switch on the scale, select the user using the UP button and wait until "0.0 kg" appears; press the Mode
button for 6 seconds until "DEL" appears.
Replacing the batteries
Your scale is equipped with a low battery indicator. If you operate the scale with flat batteries, "Lo" will
appear on the display and the scale will automatically switch off. In this case, the batteries must be
replaced (3 x 1.5 V AAA).
NOTE:
• When replacing the batteries, use batteries of the same type, make and capacity.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.

8. Cleaning and maintenance

The device should be cleaned from time to time.
This should be done using a damp cloth and, if necessary, a small amount of detergent.
IMPORTANT
• Never use abrasive solvents or cleaning products!
• Never submerge the device in water!
• Do not clean the device in a dishwasher!

9. What if there are problems?

Display
" "
BF-
or incorrect weight
is displayed.
or incorrect weight
is displayed.
Incorrect weight is dis-
played.
Cause
Unknown measurement as it
is outside the user assignment
limit or a unique assignment is
not possible.
The proportion of fat is outside
the measurable range (less
than 3% or greater than 65%).
Maximum weight capacity of
180 kg exceeded.
No even, hard surface.
Not standing still.
Incorrect zero point of scale.
Solution
Select your user by pressing the / but-
tons.
Please repeat the measurement barefoot, or
with the soles of the feet lightly dampened
if necessary.
Loads must not exceed 180 kg.
Place the scale on an even, hard surface.
Stand as still as possible.
Wait until the scale switches itself off. Acti-
vate the scale, wait for "0.0 kg" to appear
and take the measurement again.
11