Usage; Cleaning And Maintenance - Beurer BY 90 Instructions For Use Manual

7. USAGE

Saving the measured values on the baby scale and transferring them
to the app
A maximum of 10 measurements can be saved in the baby scale. The saved measure-
ments are transferred automatically to the app if you open the app within the Bluetooth
range and Bluetooth
It is not possible to automatically transfer data when the baby scale is switched off.
Deleting scale data
In order to completely delete all measurements on the baby scale, press and hold the
Bluetooth button
®
Changing the batteries
Your scale is equipped with a low battery indicator. If you operate the scale with flat batte-
ries, " " will appear on the display and the scale will automatically switch off. In this case,
the batteries must be replaced (3 x 1.5 V AAA). All saved measurements remain saved.
Note:
• You have to re-synchronise the baby scale with the app (see "Initial use with the app"
section) after replacing the batteries.
• When replacing the batteries, use batteries of the same type, make and capacity.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.

8. CLEANING AND MAINTENANCE

The accuracy of the measurements and service life of the device depend on its careful
handling:
The baby scale should be cleaned from time to time.
This should be done using a damp cloth and, if necessary, a small amount of detergent.
IMPORTANT
• Never use harsh solvents or cleaning products!
• Do not submerge the baby scale in water.
• Do not rinse the baby scale under running water.
• Do not clean the baby scale in the dish washer.
Storage
If you do not plan to use the baby scale for a long period of time, we recommend that you
store it in the original packaging in a dry environment. During storage, do not place any
objects on the baby scale. Store the baby scale away from children and pets. Remove the
batteries from the baby scale.
is switched on on the scale.
®
for 5 seconds.
22
®