Table of Contents
Advertisement
Display
No Bluetooth
con-
®
nection ( symbol is
missing).
Measurements are not
transferred to the app
(
symbol is missing)
-symbol flashes at
the end of the measure-
ment
Lo
10. Disposal
Empty, completely flat batteries must be disposed of through specially designated collection boxes, recy-
cling points or electronics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
For environmental reasons, do not dispose of the device in the household waste at the end of its service
life. Dispose of the device at a suitable local collection or recycling point in your country.
Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment). If you have any questions, please contact the local authorities responsible for waste
disposal.
Dispose of packaging in an environmentally friendly manner.
11. Technical specifications
Model:
Dimensions:
Weight:
Measurement range:
Scale interval d:
Cause
Device outside the range.
No connection to the app.
No measurement for the user
or no Bluetooth
connection.
®
User memory space is full.
The old measurements will be
overwritten.
The batteries in the scale are
empty.
BF 720
30 x 30 x 2.5 cm
1.6 kg
5-180 kg
The display can be read in increments of 0.1 kg.
Solution
The minimum range in the open is approx.
10 m. Walls and ceilings reduce the range.
Other radio waves may interfere with the
transmission. Therefore, do not position the
scale near devices such as WiFi routers,
microwaves, induction hobs etc.
Completely close the app (including in the
background). Switch Bluetooth
back on again. When doing so, please note
that the scale must not be connected from
the Bluetooth
tem. If need be, remove it from the devices
list in the Bluetooth
the "beurer HealthManager" app. Switch the
smartphone off and back on again. Remove
the batteries in the scale for a short period
and reinsert them.
The initials which appear on the scale dis-
play must be assigned to the scale in your
app settings. Only these measurements can
be transferred. Therefore, check your initials
and your app settings.
Open the app within the Bluetooth
The data will be transferred automatically.
This may take up to one minute.
Replace the batteries in the scale.
20
PAP
12
off and
®
settings of the operating sys-
®
settings, and then use
®
®
range.
Hide quick links:
Advertisement
Table of Contents
