Scandomestic SV 80 User Manual page 13

8. When open the door 90 degree, take out 2 screws (2) from
lower door axis (3), remove the door (4), then pull out the door
and door axis (Fig. A).
9. Put the door (4) safety and take out the plug (12) from top of
door frame, unscrew 1 screw (11) at bottom and remove the
Door limit device (10), then install the Door limit device (10) at
top of door frame, please use spare plug (12) to block the hole
at top of door frame. (Fig. A/B)
10. Take out 3 hinge screws (6) from top hinge (right) (5) and
remove it. (Fig. C)
11. Remove decorative nail (8) from left top of cabinet and install
spare top hinge (Left) (7) at left top of cabinet with 3 screws.
(Fig. D)
12. According above procedure, install spare lower hinge (left) (9).
(Fig. E)
13. The door revolves 180 degrees, install the door with same way it
was removed and fix it with door alignment.
14. Block the hole at right top of cabinet with spare decorative nail
(8).
For model SV 102, SV 110, SV 122 and SV 133
1. Screws
2. Top hinge (right)
3. Lock hole decorative cover
4. Decorative nail
5. Screws
6. Door axis(right)
7. Door bracket
8. Lower hinge (left)
9. Lower hinge (right)
10. Top hinge (left)
1. Take out 4 screws (1) from top hinge (right) (2) and remove the
top hinge (right),then put out the door. (Fig.A)
2. Put the door safety and take out the lock hole decorative
cover(3) and decorative nail (4) from top of door frame, unscrew
2 screws (5) at bottom and remove the door axis(right) (6), then
install the lock hole decorative cover (3) and decorative nail (4)
at bottom, please install the spare left door axis at top of door
frame. (Fig.B)
3. Remove the door bracket (7) from lower hinge (left)(8) and
install it at lower hinge (right )(9). (Fig.C)
4. The door revolves 180 degrees, put door axis to aim at lower
hinge (left) and install the door onto lower hinge (left), then
close the door carefully.
5. Fix spare top hinge (left) (10) onto left top of cabinet with 4
screws (1), then adjust door. (Fig.D)
Note: This is a two person operation.
13