Operating Your Wine Cooler - Scandomestic SV 80 User Manual

Ambient Room Temperature Limits
This appliance is designed to operate in ambient temperatures speci-
fied by its temperature class marked on the rating plate.
Class Symbol Amb. Temp. range (°C)
Extended Temperate SN
Temperate N
Subtropical ST
Tropical T
Internal LED lights
In order to reduce energy consumption, this wine cabinet will auto-
matically switch off the LED lights after 10 minutes.
If you want the LED light to remain on continuously, this is possible.
Please press and hold the "LIGHT" button for 5 seconds, the display
will show "LP". After 4 seconds the display will revert back to normal
and the light will remain on until manually switched off. If you want
to revert back and conserve energy (recommended), please press
and hold the "LIGHT" button for 5 second, the display will show "LF",
after 4 seconds the display will revert back to normal, and the light
will automatically switch off after 10 minutes.

OPERATING YOUR WINE COOLER

For SV 80 and SV 90
The controls of your wine Cooler
POWER
RUN
LIGHT
DISPLAY
• "RUN" - Indicator light illuminates to signify the cooling mode is
currently in operation.
• "LIGHT": control the inner light turn on/off.
• "POWER": control this appliance turn on/off ( press and hold
this buttons for approximately 3 seconds).
• "DISPLAY": shows the temperature of the internal cabinet.
• "UP": Used to raise(warm) the temperature in 1°C℃.
• "DOWN": Used to lower(cool) the temperature in 1°C.
Temperature Controls, Model SV 80
• To set the temperature connect the power cord to a properly
grounded outlet. In the event of power interruption, the previous
temperature setting is automatically erased and it will default to
a preset temperature setting of 12°C.
• Set the desired cooling temperature by pressing the buttons
adjacent to the "UP/DOWN" indicators. Each depression of the
buttons will scroll through the available temperature setting in
increments of 1 degree.
• The temperature setting can be adjusted from 5°C -18°C
• To view the actual temperature at anytime press and hold the
temperature adjustment button (up or down) for approximately
5 seconds, the actual temperature will temporarily flash in the
LED display for 5 seconds. After this it will revert back to the set
temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
﹢10 to﹢32°C
﹢16 to﹢32°C
﹢16 to﹢38°C
﹢16 to﹢43°C
°C
UP
DOWN
Temperature Controls, Model SV 90
• Each cooling compartment of the wine cooler/beverage cooler
(Left & Right) is independently controlled.
• To set the temperature:
Connect the power cord to a properly grounded outlet in the
event of a power interruption, all previous temperature settings
are automatically erased and each compartment will default to a
preset temperature setting of:
12°C - Left compartment
7°C - Right compartment
• Set the desired cooling temperature by pressing the buttons
adjacent to the "UP/DOWN" program. Each depression of the
buttons will scroll through the available temperature settings
(for each compartment) in increments of 1 degree. The tempera-
ture selected will flash in the LED display for approximately 5
seconds, then revert back to display the setting temperature of
the cabinet.
• Both compartments: The temperature setting can be adjusted
from 5°C ~18°C.
To view the actual temperature, (anytime) press and hold the corre-
sponding button for approximately 5 seconds, the actual temperature
will temporarily "flash" in the LED display for 5 seconds
For SV 102, SV 110, SV 122
The controls of your wine Cooler
POWER
RUN
LIGHT
Upper Chamber
POWER
RUN
LIGHT
TEMP. SET
• "RUN": Indicator light illuminates to signify the cooling mode is
currently in operation.
• "Light": control the inner light turn on/off.
• "Power": control this appliance turn on/off.
• "Set Upper": set the temperature of the upper chamber.
• "Set Lower": set the temperature of the lower chamber.
• "Up chamber": shows the temperature of the up chamber.
• "Lower chamber": shows the temperature of the lower cham-
ber.
• "TEMP SET": shows the temperature.
Setting the Temperature Control
• Each cooling compartment of the wine cooler (upper & lower) is
independently controlled. To set the temperature:
Connect the power cord to a properly grounded outlet. In the
event of a power interruption, all previous temperature settings
are automatically erased and each compartment will default to
a preset temperature setting of: 7°C for upper compartment and
12°C for lower compartment.
10
°C °C
Set Upper
Set Lower
Lower Chamber
°C °C
UP
DOWN
DISPLAY