Scandomestic SV 80 User Manual page 12

For SV 102/SV110/SV 122/SV 133
• Put the shelf gap(left and right) under the square plastic block,
uptilt the shelf,then pull the shelf from the Wine Cooler.
Note
• If the unit is unplugged, power lost, or turned off, you must
wait 3 to 5 minutes before restarting the unit. If you attempt to
restart before this time delay, the Wine Cooler will not start.
• When you use the wine cooler for the first time or restart the
wine cooler after having been shut off for a long time, there
could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal
and it is due to the length of the activation time. Once the wine
cooler is running for a few hours everything will be back to
normal.
Door Lock
(For SV 102/SV 110/SV 122/SV 133)
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User's
Guide. Insert the key into the lock and turn it counterclockwise to
unlock the door. To lock the door do the reverse operation making
sure metal pin is engaged completely. Remove the key and place it in
a secure place for safekeeping.
How to change the door opening
This appliance has reversible doors but is delivered with a right
hinged door. The left hand hinge kit comes with the unit (in the box),
should you wish to reverse the hinge on your unit.
For model SV 80 and SV 90
1. Lower hinge (Right)
2. Screws
3 .Door axis
4. Door
5. Top hinge (Right)
6. Hinge Screws
7. Top hinge (Left)
8. Decorative nail
9. Lower hinge (Left)
10. Door limit device
11. Screw
12. Plug
12