NEC PASOLINK Training Course page 102

ROI-S04488
3.
Press any key to continue ...
Step
For 1+1 System
Monitoring
1. Monitoring voltage
2. Alarm/Status
3. Inventory
00. Menu
99. Exit
Select item No. :
Alarm and Status
8 Press the "3" for 1+0 (or "2" for 1+1) key and "Enter" key, then,
following alarm items are displayed,
For 1+0 System
Monitoring of alarm/status 1/2
IDU
INPUT LOSS 1-16
CHANNEL USAGE ERROR 1-16 (alarm:**** ---- ---- ----)
AIS RCVD 1-16
AIS SEND 1-16
OUTPUT LOSS 1-16
LAN INTFC ALM
WS INPUT LOSS
WS CHANNEL USAGE ERROR
WS AIS RCVD
WS AIS SEND
WS OUTPUT LOSS
TX CLK LOSS
FSYNC ALM
HIGH BER ALM
LOW BER ALM
BER ALM
Notes: 1. "*" : indicates alarm condition.
2. "–" : indicates normal condition.
3.
4.
5.
Procedure
(alarm:**** ---- ---- ----)
(alarm:---- ---- ---- ----)
(alarm:**** ---- ---- ----)
(alarm:---- ---- ---- ----)
(alarm:-)
(alarm:-)
(alarm:-)
(alarm:-)
(alarm:-)
(alarm:-)
(alarm:-)
(alarm:*)
(alarm:*)
(alarm:*)
(alarm:*)
Monitoring of alarm/status displayed on the
LCT depend on system configuration.
CHANNEL USAGE ERROR 1-16 is displayed
only when "Channel usage error (report)" is
selected to "report" and Main channel usage is
set to used.
WS CHANNEL USAGE ERROR is not
displayed when "Channel usage error
(report)" is selected to "not report" .
OPERATION
3-51